Not sure about a purchase?
Contact us at any of our channels and get inmediate help before making decisions.
Synchro Material | Carbon |
3rd Gear Ratio | 1.667 |
4th Gear Ratio | 1.31 |
Final Drive Ratio | 5.417 |
Note | RSX Type S will need C/S bearing for 05-06 RSX Type S model |
Differential Position | Front |
Differential Type | Helical |
Final Drive Ratio | 4.928 |
Note | Only for 90-91 Integrea LS with S1 Trans |
Final Drive Ratio | 5.167 |
Note | Will not fit with Factory LSD. For Small 109mm Ring Gear Hole |
Differential Position | Front |
Differential Type | Helical |
Final Drive Ratio | 4.640 |
Note | Will not fit with factory LSD or SH with ATTS |
Final Drive Ratio | 3.471 |
Note | Will not fit with Factory LSD. For Small 109mm Ring Gear Hole |
Differential Position | Front |
Differential Type | Helical |
Final Drive Ratio | 4.000 |
Note | Large Diameter Ring Gear Hole (116.8mm) |
Final Drive Ratio | 5.080 |
Note | RSX Type S will need C/S bearing for 05-06 RSX Type S model |
Final Drive Ratio | 3.300 |
Contact us at any of our channels and get inmediate help before making decisions.