AEM Series 2 P&P EMS 00-05 Honda S2000 F20C AP1 F22C AP2

SKU
30-6052
$1,428.50
Discontinued

The manufacturer has stopped production of this item. We have none left, and cannot get more. But we can help you find a comparable alternative that is available.

Disabled

Description

This is a standalone ECU for Honda/Acura S2000 applications listed below. This ecu completely replaces the factory ecu and controls every aspect of the engine. We use it on almost every project we do because it performs excellently at a reasonable price. 

The series 2 EMS has some new features over the Series 1 box. It’s a all new platform that is no longer tied to the GEMs hardware. The new unit has 12 peak and hold injectors so a resistor box is no longer needed. It runs in direct fire so wasted spark is no longer used and a smoother, factory quality idle can be had. It uses either a serial port or usb so hunting around for older laptops will be a thing of the past. The internal logging has an increased capacity. With the series two you can password protect your maps so if your tuning and don’t want your work looked by others you have that option. It will work with the existing gauges so your AEM wideband or serial gauge will be a direct transition. 

Key Features:

  • Plug n Play
  • Full Fuel and Timing Control, Full Standalone, Fully Adjustable
  • Factory Sensors OK
  • Factory Sensors can be retained, however if they need to be changed, (like upgrading to a bigger map sensor), AEM has a full line of sensors available and we stock them!
  • Basemap Included
  • Password Protection
  • Direct Fire Ignition (no resistor box required)
  • 16 General Outputs
  • 8 General Inputs
  • Use these inputs to log various additional sensor readings (Wideband, Air Temp, Fluid Pressure, etc). These inputs can also be used to trigger fail-safes for boost, meth/water/alcohol injection, and much more
  • 4 EGT Inputs (for fuel control)
  • Internal Logging Memory
  • Log data straight to the computer and review the session with your laptop all from within the computer.
  • FULL IDLE CONTROL
  • Customizable Traction Control
  • Full Boost Control (with optional boost control solenoid)
  • 3-Step Launch Control
  • Nitrous Control
  • Definable Knock Control
  • USB Compatible
  • and more...


Series 2 Plug & Play Engine Management System for Honda S2000 00-05

AEM's Series 2 EMS is a complete engine control system that plugs into the factory harness and uses the factory sensors. This means you do not need to replace any parts of the harness or sensors, just plug the EMS into the harness and begin tuning! The Series 2 EMS for the S2K allows you to control every aspect of your F20. From VTEC to rev limit, timing, bigger injectors, boost control, nitrous injection, individual cylinder fuel and timing trims and for you drag racers there's even anti-lag! The Series 2 for the S2000 even lets you keep the stock coolant temperature gauge. Get total control for your S2000 with the Series 2 from our new tuning software - AEM Tuner.

Outputs
Injector Outputs12 Saturated
Coil Outputs4
Selectable direct drive or 0-5V Coil OutputYes
Direct plug in, no jumper harness requiredYes
General purpose LS outputs12
General purpose HS outputs4
Individual cylinder ignition trimsYes
Individual cylinder fuel trimsYes
Inputs
Trigger inputs (Ref/Sync)4
Analog voltage inputs23
Configurable Analog/RTD/Thermister inputs4
Switch inputs5
Lambda inputs2x
Knock sensors2
User adjustable knock sensor center frequencyYes
Communication
USB commsYes
RS232 commsYes
Communication cables includedYes
Fully enabled editing/logging software includedYes
CAN bus equippedYes
RS232 datastream output19 ch
CAN datastream output19 ch
Communicates with AIM Dash/DataloggersYes
Communicates with Racepak Dash/DataloggersYes
DATA Acquisition
Internal data logging1 MB
Maximum internal logging rate (per channel)250 Hz
PC loggingYes
Data analysis using AEMLogYes
Functions and Features
All channels/maps/tuning options unlockedYes
Boost controlYes
Groundspeed based boost targetYes
Nitrous injectionYes
Staged injectionYes
Ground speed limitingYes
Rate of Acceleration ControlYes
Overrun boost enhancement (anti-lag)Yes
Gear change ignition cut (shift-without-lift)Yes
Password protected calibrationsYes
Fuel & Ignition rev limitersYes
"In cockpit" global fuel trim capabilityYes
Gear dependent shift lightYes
Evap/Purge functionYes
DC Motor control2 Ch
Software definable "virtual" switch inputs2
EGT Based fuel trimsYes
Maximum boost limitNone
Stock S2000 coolant gauge supportYes
Physical Dimensions
Length192 mm
With150 mm
Height37 mm
FinishBlack Anodized


AEM Series 2 Plug-N-Play Engine Management Systems
- Legal in California only for racing vehicles which may never be used upon a highway.

This product fits the following vehicles:
  • 2000 to 2003 Honda S2000 2.0L VTEC
  • 2004 to 2005 Honda S2000 2.2L VTEC
  • Specifications

    More Information
    Barcode 840879020156
    Note Not CARB legal: Not for sale or street use in CA & CARB states.
    Shipping Weight (Dimensional) 3.150000
    Clearance Sale No
    Availability Discontinued
    Part Type PNP Engine Management Systems
    Make Honda / Acura
    Model S2000 00-03 AP1, S2000 04-09 AP2
    Engine F20C, F22C
    Brand AEM Electronics
    Carb Legal No

    Reviews

    Write Your Own Review
    You're reviewing:AEM Series 2 P&P EMS 00-05 Honda S2000 F20C AP1 F22C AP2

    Related Items List (3)

    Not sure about a purchase?

    Contact us at any of our channels and get inmediate help before making decisions.

    Copyright© 2022 realstreetperformance.com | All Rights Reserved