AI FC1000 Fuel Pump Hanger Without Walbro DW400 Pumps for Custom 230mm to 300mm Depth Fuel Tank

Aftermarket Industries FC1000 Fuel Pump Hanger Without Bosch BR540 DW400 Walbro F90000274/285 Fuel Pumps for Custom 230mm to 300mm Depth Fuel Tank

FC1000 Billet Oval Fuel Pump Hanger Special Features

Single Fuel Pump Port

• 8AN fuel ports

• Perfect fuel pressure control

• Staged fuel pump operation

• Superior fuel pressure stability due to our design protected 2-to-1 fuel pump manifold

Vent/Breather

• 8AN vent/breather port for maximum venting under heavy load
• Note: it is advised that tank is vented to charcoal canister and NOT atmosphere

Plug & Play

• The FC1000 features the Aftermarket Industries 6 way 30A (per pin) Plug & Play electrical connector to allow independent control of up to two fuel pumps.

Wiring Recommendation: Required For WARRANTY

• Electrical Wire & Circuit Size Formula
  • Circuit Breaker/Fuse Size: 125% (1.25x) total Peak Current (Amps)
    • Circuit Breaker/Fuse must NOT exceed wire current rating
  • Wire Size: 150% (1.5x) total Peak Current (Amps)
  • Relay Size: 225% (2.25x) total Peak Current (Amps)

Bio-Fuel Compatible

• Zero fuel vapour loss

• Zero fuel smell GUARANTEED due to anodising process

• Unleaded, Ethanol, C16

Engineering

• Precision machined from aerospace grade 6061-T6 billet aluminum, designed using best practice engineering principles and stress tested to ensure maximum safety for all motorsport applications

Compatible Fuel Pumps

• Walbro 255

• Walbro 460 F90000267 F90000274

• Walbro 520 / 525 F90000285

• Bosch BR540 / DW400

• PUMPS ARE NOT INCLUDED IN THIS PACKAGE

Compatible Fuel Tanks

• Custom - may require the FC1000 billet aluminum weld-on flange; Want to machine your own flange? (drawing may be requested)

Height Adjustable

• Suitable for tanks 230mm to 300mm internal depth/height

• Require more height? Add additional sets (package contains 1 set as standard) of our billet perforated spacers which will increase the overall height by 50mm per set.

Power Support Table

*BASE FUEL PRESSURE MUST BE SET @ 45 PSI OR LOWER

(Recommended Fuel Injector: Bosch Motorsport 1650cc)

**Peak Fuel Pressure (Base Pressure + Boost Pressure)

***Peak Maximum Voltage

Rotary Engine: Reduce Horsepower HP Support Figures by 30%

Billet Oval Weld-On Flange (Included): Machined from 6061-T6, the FC1100 billet weld-on flange is perfect for those that wish to fabricate their own fuel tank.

*PUMPS ARE NOT INCLUDED IN THIS PACKAGE

Need a Fuel Pressure Regulator? We've made the decision easy and added the most suitable fuel pressure regulator based on the fuel pump selection. We recommend Turbosmart FPR 1200 (1200HP) Fuel Pressure Regulator -6AN part number TS-0401-1104 or FPR 2000 (2000HP) Fuel Pressure Regulator -8 AN part number TS-0401-1106 (sold separately).

Need a Stainless Steel Fuel Filter? Aftermarket Industries developed the first and only 200 micron Walbro fuel pump fuel filter / strainer part number W460-SS (sold separately) designed for motorsport conditions and bio-fuels such as ethanol (e85).
 

Need the Correct Electrical Connector? High current draw fuel pumps require a high performance external e85 electrical connector. We've developed our own as the OEM Delphi Apex 2.8mm 6 way connector are NOT e85 compatible - two (2) connectors are required and ARE included FREE (includes 6x 10 AWG (30A) Metri-Pack 280 series pins per connector and is designed SPECIFICALLY for 10 AWG (30A) Tefzel Mil-Spec 22759/34 wire.

Need Power? Aftermarket Industries now offers a motorsport-grade Power Distribution Kit for up to 2 pumps (Sold separately).

• Single Pump Single Relay Power Distribution Kit Part Number LTL-PDU-SINGLE
• Dual Pump Dual Relay Power Distribution Kit Part Number LTL-PDM-2

Do I Need To Stage My Fuel Pumps? YES! Fuel pump operation MUST be staged via a Hobbs Pressure Switch, Aftermarket ECU or PDM (Sold Separately).

Specifications:

• 4 PSI Hobbs Switch
• 24" inch harness with 2x female Delphi 280 Series Connectors & 1x male Delphi 280 Series Connector (includes pins)

Need a Stainless Steel Fuel Filter (Walbro Pumps Only)? Aftermarket Industries developed the first and only 200 micron fuel filter / strainer designed for motorsport conditions and bio-fuels such as ethanol (e85): see AVAILABLE OPTIONS above - "Stainless Steel Walbro Fuel Filter" (select the desired quantity) 

Includes the following items: requires Assembly (estimated assembly time 30 minutes; assembly guide provided)

• Billet FC1000 hanger (8AN ports)

• 6 way 90 degree male electrical connector kit (2x female connectors, 12x pins, circlip and o-ring)

• Billet twin fuel pump bracket (includes stainless steel fasteners and viton rubber insert) - please select either the Walbro or Bosch fuel pump bracket kit

• Billet swivel fitting, spacer the fuel pump bracket support tube

• Quick connect fuel pump hose adapter kit

• Baffle plate kit (includes two billet baffle plate adapters, laser cut baffle plate and stainless steel fasteners)