Not sure about a purchase?
Contact us at any of our channels and get inmediate help before making decisions.
ARP Head Stud Kit Toyota Supra MKIV 2JZGTE 2JZGE 1JZGTE
SKU
203-4205
$212.04
10+ In Stock
Hot
10+ of these are currently available in stock at our Sanford, FL location.
Description
Head studs hold your head and block together. As you make more power than your engine was designed to hold from the factory, the head and the block push apart from each other, stretching the factory bolts, and causing various failures. ARP Head Studs are stronger than the factory fasteners, and are designed to keep your race engine together under any circumstance.
Factory fasteners were not designed for performance use. The material chosen by the Original Engine Manufacturer for your engine's factory fasteners was chosen to meet the criteria of a normally driven consumer vehicle at the provided stock horsepower and rev limit. The material is not optimum for a high reving, high heat, high power, race car.
The factory fasteners were also not designed to be reused. Every time you torque a fastener, it stretches to perform the proper clamping force. If the fasteners stretch too far, they will not longer provide the required clamping force, and can lead to an engine failure. When you take your factory engine apart to build it into your race engine, discard your used factory main bolts and switch to a brand new set of ARP Head Studs to provide your engine with the proper clamping force required to keep all of your parts together in the harshest race environment.
We have seen heads lift and blow head gaskets, pressurize the cooling system, and worse. ARP Head Studs are a very inexpensive part that couldn't be more important to your engine build. Consider them a must.
These head studs are manufactured from premium 8740 chrome moly steel and heat treated to 200,000 psi. They are thread rolled after the heat treating process, which vastly improves their fatigue tolerance compared to studs threaded before heat treatment. High-quality, parallel ground washers included. Exact tolerances ensure that gaskets and cylinder heads just glide into position and align perfectly.
Factory fasteners were not designed for performance use. The material chosen by the Original Engine Manufacturer for your engine's factory fasteners was chosen to meet the criteria of a normally driven consumer vehicle at the provided stock horsepower and rev limit. The material is not optimum for a high reving, high heat, high power, race car.
The factory fasteners were also not designed to be reused. Every time you torque a fastener, it stretches to perform the proper clamping force. If the fasteners stretch too far, they will not longer provide the required clamping force, and can lead to an engine failure. When you take your factory engine apart to build it into your race engine, discard your used factory main bolts and switch to a brand new set of ARP Head Studs to provide your engine with the proper clamping force required to keep all of your parts together in the harshest race environment.
We have seen heads lift and blow head gaskets, pressurize the cooling system, and worse. ARP Head Studs are a very inexpensive part that couldn't be more important to your engine build. Consider them a must.
These head studs are manufactured from premium 8740 chrome moly steel and heat treated to 200,000 psi. They are thread rolled after the heat treating process, which vastly improves their fatigue tolerance compared to studs threaded before heat treatment. High-quality, parallel ground washers included. Exact tolerances ensure that gaskets and cylinder heads just glide into position and align perfectly.
Specifications
| Availability New | In Stock / Available |
| Barcode | 672036007621 |
| UPC Code | 672036007621 |
| Shipping Weight (Dimensional) | 3.250000 |
| Clearance Sale | No |
| Availability | In Stock |
| Part Type | Head Studs |
| Make | Toyota / Lexus |
| Model | Supra TT MK4 93-98 JZA80, Supra NT MK4 93-98 JZA80, SC300/Soarer 92-00 Z30, IS300 01-05 XE10, GS300/Aristo 91-97 S140, GS300/Aristo 98-05 S160 |
| Engine | 1JZ-GTE, 1JZ-GTE VVTi, 2JZ-GE, 2JZ-GE VVTi, 2JZ-GTE, 2JZ-GTE VVTi |
| Brand | ARP |
| Fastener Type | Stud |
| Fastener Material | 8740 Chrome Moly |
| Carb Legal | Unspecified |
| Product Flags | sale |
| Shipping Label | Free Shipping |
Reviews
Write Your Own Review
Related Items List (7)
Real Street T-Shirt Black w/ Green & White Logo
SKU#RS-TSHIRT
$23.99
Select Options
Eat Sleep Race ABC Book for Future Race Car Drivers
SKU#ESR 1233
10+ In Stock
Dress Up Bolts IS300 Altezza 98-05 2JZ-GE Titanium Dress Up Bolts Full Engine Bay Kit
SKU#TOY-003-Ti
$318.99
Select Options
Dress Up Bolts IS300 Altezza 98-05 2JZ-GE Titanium Dress Up Bolts Partial Engine Bay Kit
SKU#TOY-004-Ti
$219.99
Select Options
Dress Up Bolts IS300 98-05 2JZ-GE Titanium Dress Up Bolts Engine Kit with Engine Cover
SKU#TOY-005-Ti
$49.49
Select Options
Dress Up Bolts IS300 98-05 2JZ-GE Titanium Dress Up Bolts Engine Kit without Engine Cover
SKU#TOY-006-Ti
$21.99
Select Options
Dragy 2.0 GPS Based Performance Meter Box USB-C Bluetooth 5.0 with built-in Battery New Version DRG70-C
SKU#DRG70-C
10+ In Stock
Related Items
-
SPECSSpecs Color Black Size XS, S, M, L, XL, XXL, XXXL, XXXXL Gender Unisex - Dress Up Bolts IS300 98-05 2JZ-GE Titanium Dress Up Bolts Engine Kit without Engine Cover TOY-006-Ti
SPECS
Specs Color Black, Blue, Gold, Polished, Purple, True Burned Fastener Material Titanium -
SPECS
Specs Color Black, Blue, Gold, Polished, Purple, True Burned Fastener Material Titanium -
SPECS
Specs Color Black, Blue, Gold, Polished, Purple, True Burned Fastener Material Titanium -
SPECS
Specs Color Black, Blue, Gold, Polished, Purple, True Burned Fastener Material Titanium -
$12.9510+ In Stock
-
$159.0010+ In Stock