Brian Crower 58lbs Single Valve Spring Steel Retainers Kit Honda Fit L15 BC0089S

SKU
BC0089S
$188.38
Available

Not in stock at our Sanford, FL location but electronically verified in stock at the Manufacturer/Distributor within the last 12 hours. (aka: not experiencing a supply delay)

Description

Aftermarket cams increase the efficiency of your head by using higher lift and duration. Any time you increase the lift and duration of a cam, you are putting more stress on the valvesprings and retainers. Factory valvesprings were not made to handle the abuse of higher lift and duration, especially not at the rpm we take our engines to when racing, or even driving enthusiastically. If you are installing upgraded cams, do yourself a favor and install valvesprings and retainers while you're in there.

Your stock valve springs can fail in 3 different ways.

  • BIND -
    • They can "bind" and get stuck, losing their ability to open and close the valve. This is an easily diagnosable failure. Depending on how it binds, it could cause failure to other engine parts.

  • BREAK -
    • They can "break" into pieces dropping the valve into the combustion chamber and consequently ruining your bottom end.

  • FLOAT -
    • "Valve Float" is a hard to diagnose condition where the valve spring rate is not high enough to fully extend the spring and close the valve after a complete rotation of the cam before the cam comes back around again. So what ends up happening is that when the cam is spinning fast (high rpm) the valve never closes, and combustion leaks out of the engine, and the engine loses power.


These single valve springs and steel retainers replace your factory ones to allow you to rev higher, and put more abuse on the engine than it was designed to handle from the factory.

Specifications

More Information
Availability New In Stock / Available
Shipping Weight (Dimensional) 1.700000
Clearance Sale No
Availability Available
Part Type Valve Spring & Retainer Kits
Make Honda / Acura
Model Fit 01-08 GD, Fit 09-14 GE
Engine L15A
Open Pressure 138lbs @ 33.02mm
Max Lift 13.97mm
Coil Bind 25.98mm
Brand Brian Crower
Valve Spring Type Single
Seat Pressure 58lbs @ 43.18mm
Carb Legal Unspecified
Retainer Material Steel
Shipping Label Free Shipping

Reviews

Write Your Own Review
You're reviewing:Brian Crower 58lbs Single Valve Spring Steel Retainers Kit Honda Fit L15 BC0089S

Related Items List (3)

Not sure about a purchase?

Contact us at any of our channels and get inmediate help before making decisions.

Copyright© 2022 realstreetperformance.com | All Rights Reserved