Davies Craig EWP150 Aluminum Remote Electric Water Pump 150 lpm 12V -16AN ORB Female Inlet / Outlet

EWP 150 Remote Electric Water Pump (12V) (Part #8160)

The EWP®150 Alloy 12V is available for purchase in following options:

• Pump Only (Part #8160)
• Kit (Part #8060)
• Combo with Controller (Part #8970)

Muscle up your engine cooling system with the Davies Craig EWP®150 alloy Electric Water Pump. Like all EWPs, this advanced unit is designed for remote mounting in the engine bay to satisfy those higher horsepower, turbocharged, supercharged and ‘worked’ engines which develop excessive heat & intercooler applications.

The compact EWP®150 alloy unit is manufactured with -AN16 ORB internal inlet and outlet fittings for neat, tight screw-in fitting applications. This rugged alloy hi-flow electric water pump is designed to complement or replace the engine’s existing mechanical water pump. This essential performance accessory increases power to your vehicle’s drive wheels and improves coolant temperature control.

Operating voltage: 3V DC to 15V DC
Maximum current: 10A @ 13V
Flow rate (max): 150L/min (39.63 US gal/min) @ 13V DC
Operating temp: -40° to 120°C (-40° to 248°F)
Pump design: Clockwise centrifugal with volute chamber

Pump weight: 1,170 grams (2.6 lb)
Pump material: Aluminium (Powder Coated)
Burst pressure: 500 kPa (72.5 psi)
Seal: Ceramic face seal
Self Priming: No, none of our pumps are self-priming

Fits hose size: 35mm to 51mm (1.38” to 2”)

Push-On fitting Size: EWP Inlet & Outlet 38mm

• with 3mm Sleeve (#8510) 44mm
• with 6mm Sleeve (#8511) 51mm

Internal Fitting: -Inlet & Outlet: -16AN ORB

Combined with an LCD EWP®/Fan Digital Controller (Sold separately Part #8002 or EWP® Combo Pack) will manage both the EWP® and Thermatic® fan operation. The Digital Controller will vary the speed of the EWP® in response to the engine’s coolant temperature. Multiple temperature settings are provided on the Controller for either maximum power or fuel efficiency. The Thermatic® Fan/s will be activated automatically once the engine coolant rises 3°C (5.4°F) above the targeted (set) temperature. The Digital Controller will automatically run on for three minutes (or to 10°C / 14°F below the set temperature) after engine shut down, eliminating ‘heat soak’ and extending engine life. The EWP® Controller Combo Pack is supplied in a do-it-yourself kit with everything you need for fitment to your vehicle’s engine, including an easy-to-follow DIY instruction booklet.