AI FC1500 Fuel Pump Hanger with Surge Tank and Dual Venturi Pumps and Active Valve System

Aftermarket Industries FC1500 Fuel Pump Hanger with Surge Tank and Dual Venturi Pumps and Active Valve System

FC1500-2XV-S Billet Oval Fuel Pump Hanger Special Features

Fuel Pump Hanger Filler (Fuel Cap)

• Included fuel cap is for those that wish to fill directly via the FC1500 fuel pump hanger

Single Fuel Pump Port

• 8AN fuel ports

• Perfect fuel pressure control

• Staged fuel pump operation

• Superior fuel pressure stability due to our design protected 3-to-1 fuel pump manifold

Dual Venturi Pump

• The FC1500-2XV-S (2x Venturi) is the worlds first fuel system to feature Dual Venturi Vacuum Pumps.
• Developed in-house using leading CFD modelling software and techniques (200 data points, 250 man hours and 90 hours of continuous simulation)
• The Dual Venturi Vacuum Pumps require no wiring, draw no current yet is able to generate enough vacuum to pull through, using two billet 3/8 quick connect weld-on fittings, up to 220 litres per hour of fuel into the billet tubes and deliver fuel into the fuel pump pick-up zone to ensure that the fuel pumps are submerged at all times and there is no possibility of fuel starvation or fuel surge.
• The weld-on fittings must be located at the furthest point at the rear of the fuel tank
• The e85 corrugated hoses provided are 250mm in total length (please measure accurately before final fitment/welding) - if you require a longer hose please contact us, so we can add it to your order.

Surge Tank / Active Valve System

• Active Valve System: The FS1000 surge tank features the Aftermarket Industries Active Valve System; The AFVS are engineered to close and trap fuel under acceleration, cornering and breaking. The valves then open, when load is reduced, to allow fuel to rapidly re-fill the surge tank to eliminate fuel surge and/or fuel starvation.

Dual Vent/Breather

• Dual 8AN vent/breather port for maximum venting under heavy load
• Note: it is advised that tank is vented to charcoal canister and NOT atmosphere

Plug & Play

• The FC1500-2XV-S features the Aftermarket Industries 6 way 30A (per pin) Plug & Play electrical connector to allow independent control of up to three fuel pumps.?

Wiring Recommendation: Required For WARRANTY

• Electrical Wire & Circuit Size Formula
  • Circuit Breaker/Fuse Size: 125% (1.25x) total Peak Current (Amps)
    • Circuit Breaker/Fuse must NOT exceed wire current rating
  • Wire Size: 150% (1.5x) total Peak Current (Amps)
  • Relay Size: 225% (2.25x) total Peak Current (Amps)

Bio-Fuel Compatible

• Zero fuel vapour loss

• Zero fuel smell GUARANTEED due to anodising process

• Unleaded, Ethanol, C16

Engineering

• Precision machined from aerospace grade 6061-T6 billet aluminum, designed using best practice engineering principles and stress tested to ensure maximum safety for all motorsport applications

Compatible Fuel Pumps

• Walbro 255

• Walbro 460 F90000267 F90000274

• Walbro 520 / 525 F90000285

• PUMPS ARE NOT INCLUDED IN THIS PACKAGE

Compatible Fuel Tanks

• Custom - may require the FC1500 billet aluminum weld-on flange

• ATL 6x9 FIA-FT3 fuel tanks (please check minimum internal height before purchase: must be 10 inches)

• Fuel Safe 6x9 FIA-FT3 fuel tanks (please check minimum internal height before purchase: must be 10 inches)

• Most FIA-FT3 6x9 fuel tanks

Height Adjustable

• Fuel pump height is adjustable between 254mm (10 inches) to 304mm (12 inches) internal depth/height

• Baffle height is also adjustable

Power Support Table

*BASE FUEL PRESSURE MUST BE SET @ 40 PSI OR LOWER

(Recommended Fuel Injector: Bosch Motorsport 1650cc)

**Total Peak Fuel Pressure (Base Pressure + Boost Pressure)

***Peak Voltage

Rotary Engine: Reduce Horsepower HP Support Figures by 30%

Billet Oval Weld-On Flange (included): Machined from 6061-T6, the FC1500 billet weld-on flange is perfect for those that wish to fabricate their own fuel tank.