Now In Stock: HRB, Whipple, Fuel Factory, One Ethanol

We are hiring for sales! Apply Here

Haltech Nexus S2 ECU w/ PNP Adapter Harness Silvia S14A S2 KOUKI Silvia S15 ADM JDM SR20DET Manual

SKU
HT-212317
$2,190.00
Back Ordered

This item is out of stock at the manufacturer level, and experiencing a known global supply delay. Contact us for the latest availability date estimation.

Description

SUPPORTED MODELS:
Nissan 200SX / Silvia S15 ADM/JDM (SR20DET) Manual Transmission
Nissan 200SX / Silvia S14A S2 "KOUKI" ADM/JDM (SR20DET) Manual Transmission
Nissan Silvia 180SX S13 Rev 3 Type X MY 1996+ (SR20DET) Manual Transmission

Nissan 240SX MY89-94 USDM (KA24DE) Manual Transmission

Nissan Pulsar N14 and N15 SSS (SR20DE) Manual Transmission
Nissan Pulsar N14 GTI-R (SR20DET) Manual Transmission

Nissan GTI-R Micra K11 (CG13DE) Manual Transmission

Suits: Plug 'n' Play replacement of the factory ECU for Nissan 200SX/Silvia S15 (Australian Delivered and JDM) 200SX/Silvia S14A S2 "KOUKI" 180SX S13 Rev 3 "Type X" 1996 onwards Pulsar N15 and N14 SSS and GTI-R Micra K11 (CG13DE) Manual transmissions only.

Includes: Nexus S2 ECU, Injection molded plastic plug 'n' play adaptor harness, M14 x 1.5 air temp sensor with matching plug and pins, auxiliary I/O 16 Pin Tyco plug and pins.

Notes: Manual transmission only.


ECU OVERVIEW
Haltech's Nexus S2 is the successor to the acclaimed Elite 1500, offering a serious upgrade in performance and functionality. The S2 combines all the classic functionality of the Elite 1500 with new features and the superior processing power of the successful Nexus platform.
  • 4 x peak/hold injector drivers (can be used as low side drive outputs)
  • 4 x low current ignition outputs (can be used as low side drive outputs)
  • 6 x low side drive outputs, PWM capable (DPOs)
  • 4 x push-pull / half bridge outputs (8A, PWM capable), eg for electronic throttle
  • 1 x ECR output
  • 11 x 0-5V analog inputs with redundancy for electronic throttle and switchable 5V pullup
  • Trigger and home inputs with differential inputs, adjustable thresholds and glitch filters
  • 6 x synchronous pulsed inputs, zero crossing or adjustable thresholds - cam sensor inputs, frequency inputs or 0-5V analog inputs
  • 1 x on-board wideband controller, supporting NTK and LSU4.9
  • 1 x on-board 4 bar MAP sensor
  • 2 x CAN ports with switchable termination
If you are using a factory harness and are after an easy ECU upgrade, take a look at Haltech Plug 'n' Play Adapter Kits. These adapters plug directly into your Haltech ECU and have a set of factory connectors on the other side which plug straight into the factory harness.
  • A simple Haltech Plug 'n' Play product that allows you to be up and running in just a few hours.
  • The quick start guide will walk you through installation of the Haltech Plug 'n' Play adapter into your vehicle.

ECU FEATURES
  • Controlled via NSP (Nexus Software Programmer)
  • Long Term Learning
  • Stepper Motor Control
  • 4D Closed Loop Boost Control
  • Closed Loop CO2 Control
  • Rotational Idle
  • Launch Control
  • Traction Control
  • Anti-Lag
  • Dual Knock Control
  • Trans Brake Control
  • Race Timer
  • Multi Stage Fuel Injection
  • Multi-level Engine Protection
  • 6 Stage Nitrous Control
  • 4-sensor variable cam control
  • Intake Air Bleed Control
  • Flat Shift Control
  • Shock Travel & Ride Height Control
  • Advanced Torque Management
  • On-board Wi-Fi
  • On-board datalogging (128MB)
AUTOMATIC TRANSMISSION CONTROL
  • Ford AODE/4R70W
  • GM 4L60E
  • GM 4L80E
  • Toyota A340E
  • Lenco
  • Liberty
  • This harness when installed in conjunction with a Haltech Nexus S2 ECU opens the door to virtually limitless performance modification and tuning of your vehicle.
  • Fully programmable systems allow you to extract all the performance from your engine by delivering precisely the required amount of fuel and ignition timing that your engine requires for maximum output under all operating conditions.

Specifications

More Information
Note Manual Transmission Only. Supports Silvia 180SX S13 Rev 3 Type X MY 1996+ SR20DET, 200SX / Silvia S14A S2 "KOUKI" ADM/JDM SR20DET, 200SX / Silvia S15 ADM/JDM SR20DET, and Pulsar N14 GTI-R SR20DET.
Shipping Weight (Dimensional) 4.000000
Clearance Sale No
Availability Back Ordered
Part Type PNP Engine Management Systems
Make Nissan / Infiniti
Model Silvia 89-94 S13, Silvia 95-98 S14, Pulsar GTI-R 90-94 N14, Silvia 99-02 S15
Engine SR20DET
Wideband O2 1 Channel
Brand Haltech
Waterproof No
Trans Brake Yes
Traction Control Yes
Timer Functions Yes
Rolling Anti-Lag Yes
Nitrous Control Up to 6 Stages
CAN Ports 2
Boost Control 4D Closed Loop
Anti-Lag/Rotational Idle Yes
Advanced Torque Management Yes
Closed Loop 02 Control Yes
Closed Loop Idle Speed Control as per OEM
Data Logging PC and OnBoard
co2boost_wastegate_press_post No
Low Imp Injector Control Yes
Launch Control Yes
Knock Control 1 Channel - Long Term
Intake Air Bleed Control No
Flex Fuel Input Yes
Flat Shift Advance
Engine Protection Advanced
Carb Legal No
Long Term Learning Up to 4D

Reviews

Write Your Own Review
You're reviewing:Haltech Nexus S2 ECU w/ PNP Adapter Harness Silvia S14A S2 KOUKI Silvia S15 ADM JDM SR20DET Manual

Related Items List (3)

Not sure about a purchase?

Contact us at any of our channels and get inmediate help before making decisions.

Copyright© 2022 realstreetperformance.com | All Rights Reserved