K-Tuned CMC Clutch Master Cylinder Reservoir For 00-06 S2000 AP1 AP2 F20C F22C

Application: 
00-06 S2000 AP1/AP2
Note:
* Use a rag or shop towels to absorb fluid inside original first
* Place a thick absorbant towel below master to ensure any leaks don't come in contact with paint

K-Tuned CMC Reservoir is a direct replacement for S2000 CMC. Machined from 6061 aluminum it offers the same volume as OEM. The double o-ring seal ensures no chance of leak. Set screws lock the reservoir in place once located. The diaphragm allows fluid movement without letting air interact with brake fluid. This is crucial as brake fluid is hygroscopic (absorbs water from the air) which can cause premature clutch fatigue and overheating. 

This can be changed without re-bleeding clutch system. First, place an absorbent towel or cloth below the CMC. You do not want brake fluid to come in contact with any paint. Using a syringe or absorbent towel you can slowly suck up the fluid inside the reservoir. Once the brake fluid is low enough you can remove the stock reservoir. Place a small amount of lube/oil on the o-rings before installing. Slowly press the new reservoir onto the CMC ensuring not to pitch or tear an o-ring. Once installed use the set screws to lock the CMC into place.