LSK Yamaha YXZ1000R 2016+ 2 Seater Weld It Yourself Radius Cage Kit

The factory cage that comes on this vehicle from the factory may be rated for a tip over, but when it comes to pushing the limits in aggressive racing scenarios with high performance modifications that allow increased speeds, you want to trust something stronger to keep you safe. This LSK Cage changes the body lines of the vehicle giving it an aggressive look while also increasing your level of safety in the event of a roll over.
 
This kit arrives as bare uncoated pre-cut and pre-bent tube ready for assembly and welding. The roof skin you see in the photos is sold separately.  
 
We stock these kits on the shelf and we do install these kits and have them powder coated locally. Please message us if you are interested.

This cage is built with .095" DOM tubing that can be either MIG Or TIG welded without the use of a specialized fixture - Just install the supplied connectors to the stock cage locations and piece together the cage on the vehicle.

INCLUDES

• 17 Laser Cut Tube Pieces with Laser Etched Part Numbers on Each Component
• 1.75" OD .095 Wall DOM Tubing for Main Structure
• 1.50" OD .095 Wall DOM Tubing for Windshield Cross Bars
• (4) A or C Pillar Clamps & (2) B Pillar Clamps to Attach to OEM Cage Location

 

REQUIRES

• Welding - This kit can be welded together once configured on the vehicle

UPGRADES (Sold Separately)

• Aluminum Roof (Sold Separately) part number LSK YXZ RADIUS ROOF KIT - .06 Thick Roof with small Visor Bend - Complete with weld on tabs and 1/4" Grade 8 hardware

NOTES

• This cage sits 17.00" (41.27cm) tall from center of B pillar through bolt to highest point on cage
• Aluminum roof upgrade is a single piece of .06 aluminum with a slight visor bend up front to match the cage radius
• Harness Bar Measures A 1.5" OD Diameter