PHR Dual High Performance Spal Twin Fan Kit Polished For Supra 93-98 2JZ-GTE PHR 01010618.P

SKU
PHR 01010618.P
$911.84
Call

Not in stock, but we will contact the manufacturer and other warehouse distributors to find out how quickly we can get it to you.

Description


PHR is constantly striving to improve the Toyota Supra platform. And on a highly-modified Supra, heat is a problem. With HUGE front mount intercoolers, high idle speeds, heat drenching turbos and high performance motors all saddled with a hot A/C condenser, maintaining reasonable engine temperature is a real problem. Upgraded radiators and fan setups are installed to help to address this problem, but sometimes they still come up short. Airflow must be improved to remove the heat from the motor.

To address these problems, PHR is happy to introduce the highest flowing fan setup ever introduced for the Toyota Supra: The PHR Dual High-Performance Spal Fan Kit. Flowing nearly a combined 3500CFM of air, this fan kit dwarfs any other on the planet.

At high vehicle speeds as airflow increases to the front of the car, if high pressure is built in front of the fans, bypass flaps open to allow even more airflow through the radiator, furthering cooling even more.

The PHR Dual High-Performance Spal Fan Kit comes with a PHR aluminum fan shroud, 2 twelve inch Spal High-Performance Fans, each pulling 1640CFM. Also included is the PHR Fan Control Relay Harness for fan control using simple on/low/high fan speed control.

This fan setup is designed to fit the Supra but will require the following modifications:

  • Small Battery in stock location or battery relocated to the trunk
  • Custom Intercooler Piping to route around fans or preferably run through battery location.


Installation is simple using PHR's wiring harness and PHR's Fan Control Relay Harness. Simply wire to your aftermarket ecu for full control over the speed of your fans.

Polished finish on the fan shroud.

Note: If running PHR Dry Sump Kit, one fan will be swapped to a slim fan to accommodate the dry sump drive gear. This will reduce overall airflow but will still be a very large amount of air. Keep this in mind when selecting.

Will also fit SC300 with Supra Radiator Installed.

Specifications

More Information
Old Part Number 01010618.P
Note If running PHR Dry Sump Kit, one fan will be swapped to a slim fan to accommodate the dry sump drive gear. This will reduce overall airflow but will still be a very large amount of air.
Shipping Weight (Dimensional) 25.000000
Clearance Sale No
Availability Call
Part Type Radiator Cooling Fan and Shroud Kits
Make Toyota / Lexus
Model Supra TT MK4 93-98 JZA80
Engine 2JZ-GTE, 2JZ-GTE VVTi
Color Polished
Brand Powerhouse Racing
Carb Legal Unspecified
Shipping Label Free Shipping

Reviews

Write Your Own Review
You're reviewing:PHR Dual High Performance Spal Twin Fan Kit Polished For Supra 93-98 2JZ-GTE PHR 01010618.P

Related Items List (3)

Not sure about a purchase?

Contact us at any of our channels and get inmediate help before making decisions.

Copyright© 2022 realstreetperformance.com | All Rights Reserved