PHR S23 Twin Scroll Turbo Manifold 2JZ-GE Non-VVTi T4 Twin Scroll 1.25" SS dual 44-46mm wastegates

Powerhouse Racing is proud to offer our S23 Twin Scroll Turbo Manifold for the 2JZ-GE engine. Features 1.25" primaries and hand built collector. Uses Precision 46mm or Tial 44mm wastegates.

This manifold was designed for 3 purposes:

First: Ease of installation. - Don't spend years trying to get your manifold to fit, only to have it come loose again. Those with the experience have bloodied enough knuckles, and ground down enough nuts to know how important this is.

Second: Fitment. -This manifold is hands down the best fitting manifold on the planet. Not only does this manifold fit in the car the way it should, it fits EVERY T4 turbo available. From the baby T4's to the massive Precision 8685. Even with the H cover this turbo fits under the stock hood, away from the shock tower. Nobody else can claim this. Nobody else is even close.

**Note** To fit with the distributor on early generation GE motors the turbo location changes. Our manifold will still accommodate up to a GT42/PTE 8685 Sportsman Cover. This will also require a distributor cap delete and coil on plug conversion. Simplifying some of the struggles NA-T guys have fought when building a quality turbo kit with larger turbos. Make sure to choose the right location for your setup.

Third: Maximum Performance. - We put our manifold up the the most well known and top notch manifolds in the world and blow their doors off!

Reasons you want this manifold and not the other garbage out there:

1.First our manifolds use schedule 10 stainless steel tubing. Most use 14-18 gauge which is very thin and which will not last for a long time and if the material breaks off, (which others have multiple times) you will trash the turbo with the slag and broken off parts from the cheap material used as it shoots up in the turbo

2.All TIG welded, Fully back purged, for strength quality and flow.These also eliminates any crystallization (slag). Slag can break off from inside lesser manifolds and damage the turbo.>

3. Our collector design is the best available. It’s flow is far superior to any you will find out there. It also promotes inertia of cylinder pulses, improving horsepower and response, as well as reduced back pressure.

4.The manifold uses any waste gate available and any variety of sizes and needs for each customer (more personal build) other name brand manifolds waste gate assemblies have Fallen off over time!

5.Longer runner design will increase power and torque, especially with larger turbo set ups

6.The superior design of the waste gate(s) also do not get in the way of the intercooler pipe, or air filter set up

7. They will clear ANY turbo up to an GT45\80 with maximum clearance allowed from valve cover, hood, strut tower, and water neck.

8. Do any custom configuration of down pipe and mid pipe set ups, for any exhaust set up, saving more fabrication and down time

9.Optional ceramic coating

10. Each one is built on a car so fitment and quality is guaranteed Powerhouse Racing Turbo Manifolds - Our manifolds are hand built in-house by some of the best fabricators on the planet. Pain-staking detail is taken in every inch of these works of art. We'll put our workup against anybody on the planet. You won't find one better. We've been doing it longer and we've been doing it better. We have the experience that nobody else does. And our manifolds are backed by 20 years of proven performance.