Not sure about a purchase?
Contact us at any of our channels and get inmediate help before making decisions.
1 of these are currently available in stock at our Sanford, FL location.
Aluminum Connecting Rods offer the benefit of absorbing vibration and load that may cause a steel rod to bend or break. While they are sometimes lighter than steel rods, the real benefit comes from the increase in abuse they can handle over a steel rod.
The downside to an aluminum rod is that the steel rod will live longer, however the aluminum rod will usually live as long as the aluminum piston is attached to, so if the engine has to come apart to replace pistons, you will replace rods at the same time when using an aluminum rod.
These rods use a smaller rod journal that is specifically designed to be used with a crank that uses a smaller journal as well. The smaller journal means you can use a smaller bearing, which means less bearing speed. Slowing the bearing speed down gives the engine a better chance at living longer. So make sure when buying these rods, that you will be using a crank that has honda journals instead of standard toyota journals.
Rod bearings are not included in this listing, but these are the approved doweled rod bearing part numbers that can be used with this rod:
Clevite CB-1665HXND
Clevite CB1665HNDC
Clevite CB-1665HNDK
Clevite CB-1665HND
Availability New | In Stock / Available |
Old Part Number | R&R 2JZ-GTE 5.669" L19 HONDA JOURNAL LONG ROD 2000HP |
Note | Requires 1.888" Honda journal crank |
Note | Requires 1.888" Honda Journal Crank. Requires Clevite Doweled Rod Bearings. |
Item Weight | 524 g |
Shipping Weight (Dimensional) | 8.200000 |
Clearance Sale | No |
Availability | In Stock |
Part Type | Connecting Rods |
Make | Toyota / Lexus |
Vehicle Model | Supra MKIV |
Model | Supra TT MK4 93-98 JZA80, Supra NT MK4 93-98 JZA80, SC300/Soarer 92-00 Z30, IS300 01-05 XE10, GS300/Aristo 91-97 S140, GS300/Aristo 98-05 S160 |
Engine | 2JZ-GE, 2JZ-GE VVTi, 2JZ-GTE, 2JZ-GTE VVTi |
Rod Length | 5.669" / 144mm |
Rod Length Oversize | 0.079" / 2.0mm |
Pin Size | 0.866" / 22mm |
Brand | R&R Racing Products |
Small End Width | 1.010 |
Rod Material | Billet Aluminum |
Rod Journal Size | Honda/Chevy 1.888in Diameter |
Rod Bolt | 3/8" ARP L19 |
Beam Type | Solid Beam |
Carb Legal | Unspecified |
Product Flags | sale |
Shipping Label | Free Shipping |
Contact us at any of our channels and get inmediate help before making decisions.