Radium Engineering Fuel Hanger Surge Tank w/o Pumps for R8 2007+ 5.2L Huracan EVO 2019+ 5.2L

Vehicle Fitment:

Audi R8 Gen1 Type 42 07-15 5.2L V10

Audi R8 Gen2 Type 4S 2016+ 5.2L V10

Lamborghini Huracan LP580-2 16-19 5.2L V10

Lamborghini Huracan LP610-4 14-19 5.2L V10

Lamborghini Huracan LP640-4 17-19 5.2L V10

Lamborghini Huracan EVO 2019+ 5.2L V10

Lamborghini Huracan STO 2021+ 5.2L V10

Lamborghini Huracan Tecnica 2022+ 5.2L V10

Lamborghini Gallarado LP550-2 10-13 5.2L V10

Lamborghini Gallardo LP560-4 08-13 5.2L V10

Lamborghini Gallardo LP570-4 10-13 5.2L V10

The Radium Engineering Fuel Hanger Surge Tank (FHST) is a drop-in aftermarket fuel pump solution for maximizing power potential.

There are a couple advantages to this unique system.

1. The FHST independently supplies fuel to the port injectors, while the direct injection system remains undisturbed using the OEM fuel pump. Because of the high pressure spikes created by the mechanical high pressure fuel pump (HPFP), the Huracan/Type 4S restricts port injection fuel rails using orifice fittings.

Now that these fuel systems are separate, these 2 restrictive fittings will no longer be used.

2. The surge tank functions to ensure that a fuel reserve is kept trapped around the aftermarket fuel pump to prevent starvation. Unlike the OEM fuel system, which uses a small single pump collector in the RH tank, this system uses an additional (surge tank) collector in the LH tank to prevent pump cavitation at high power levels.

Features

• Drop-In Installation
• Brushless Fuel Pump Compatibility
• Fuel Starvation Protection
• Additional Port Injection Potential
• Prevents Cavitiation in High Power Applications
• High Current Electrical Hardware
• Compatibility with Popular Fuel Pumps
• Anodized Aluminum Construction
• Gasoline, Methanol, and Ethanol Compliant
• Fuel Resistant Tubing and Wiring
• Stainless Steel Hardware

PUMP COMPATIBILITY

This system requires a single aftermarket fuel pump (sold separately). The following aftermarket fuel pumps are verified to be compatible with the FHST:

• Walbro F90000267
• Walbro F90000274
• Walbro F90000285
• Walbro F90000295
• Walbro GSS342
• AEM 50-1200
• Bosch BR540
• Deatschwerks DW400
• Deatschwerks DW440 (brushless)
• Deatschwerks DW810 (brushless)
• Protec 11928 (brushless)
• Fuelab 49614 (brushless)
• Injector Dynamics BPC1000 (brushless)
• Ti Automotive BKS1001 (brushless)

HOW THE FHST WORKS

The OEM system contains a fuel pump, fuel pressure regulator (FPR), fuel filter and multiple venturi jet pumps. In factory form, the OEM fuel pump supplies fuel to the engine through the fuel filter which has an integrated FPR. This pressure regulated fuel is also used as the driving force for multiple venturi jet pumps. These OEM venturi jet pumps transfer fuel from opposite ends of the fuel tank to the OEM pump basket keeping it full.

The Radium FHST drops into the LH opening of the fuel tank which is the opposing side of the OEM fuel pump on the RH side of the fuel tank. It does NOT disrupt any aspect of the OEM fuel system and still uses all OEM fuel level sensors. Fuel is still supplied to the engine using the OEM pump, OEM filter, OEM FPR, and OEM venturi jet pumps. The FHST uses a separate pump outlet and return inlet making it ideal for an independent port injection or custom fuel system.

The FHST canister is supplied with fuel from the 3 following sources:

1. The LH OEM venturi jet pump now fills the FHST canister first and then the overflow bleeds into OEM fuel pump basket, just like factory. This OEM jet pump was flow tested at Radium Engineering to be 302LPH (max).

2. The returning fuel from the aftermarket FPR (included in 20-0867-03 and 20-0867-05) enters the FHST canister through a diverter to prevent aeration and fuel foaming.

3. The three 1-way fill valves at the bottom of the surge tank flow 355LPH each (1,065LPH total).

NOTE: The early and late fuel tanks are slightly different. For the later GEN2 R8 (Type-4S) and Huracan, the FHST resides just above the OEM jet pump and fuel level sensor. On these cars, we recommend running a 1/2 tank (minimum) for track use. For the GEN1 R8 Type-42 and Gallardo, this is NOT required. The FHST sits at the very bottom of the factory tank allowing all the fuel to be drawn into the FHST through these valves.

For Lamborghini Huracan and Gen2 Audi R8 (Type-4S) vehicles, consult with your tuner to get the most out of this system.

ELECTRICAL

The custom designed stainless electrical studs easily handle the high current demand that compact multi-pin bulkhead connectors lack. These serviceable connections are hermetically sealed and impervious to all standard and exotic fuels.

Non conductive anodized aluminum acorn nuts are provided to prevent any accidental short circuiting. Electrical hardware is included for the fuel pump and the OEM level sensors. Furthermore, the in-tank wiring is insulated with high quality chemically resistant ETFE. A relay kit, such as 17-0031, is recommended to drive this new internal FHST fuel pump.