Radium Engineering Fuel Rail Black Toyota Supra NT MK4 93-98 JZA80 IS300 XE10 01-05 2JZ-GE 20-0371

The Radium fuel rail for the 6-cylinder Toyota 2JZ-GE (Non-Turbo) engine is manufactured with a large 8AN ORB internal bore supporting all horsepower requirements. They are CNC machined from 6063 aluminum, black anodized, and laser etched for a high quality surface finish. For flexibility, the fuel rail features four 8AN ORB ports and is compatible with all fuel types including popular alcohol mixtures such as E85.

NOT compatible with the 2JZ-GTE (Turbo) engine. 


IMPORTANT: The fuel rail re-uses the factory mounting bolts and plastic spacers. Make sure these are present before beginning installation.

INFORMATION REGARDING OEM PRESSURE REGULATOR

Late model 2JZ-GE vehicles use a returnless fuel system where the fuel pressure regulator (FPR) is integrated into the pump assembly. However, early model 2JZ-GE vehicles use a traditional fuel system with the FPR mounted directly to the fuel rail. To reuse this OEM regulator mounted on the Radium fuel rail, purchase 20-0301 FPR Adapter, 8AN ORB, 11mm Bore, 39mm Spacing, M6 .

INCLUDED

The package will contain the following items:
-Black Anodized Laser Etched Aluminum Fuel Rail
-Injector Seats for Toyota Air Assist Manifolds (x6)



FUEL INJECTOR FITMENT

OEM TOYOTA INJECTORS ON 2JZ-GE ENGINES
The Radium Engineering fuel rail features 11mm injector bores making it compatible with ALL factory Toyota 2JZ-GE (Non Turbo) fuel injectors. This includes non VVT-i and VVT-i engines as well as air-assist and non air-assist injectors. No modifications are needed. If preparing to use aftermarket fuel injectors, read below.

AFTERMARKET INJECTORS For 94-98 USDM Supra Non Turbo and 92-97 SC300 2JZ-GE Non VVTI ENGINES (WITHOUT AIR-ASSIST)

Injector Dynamics ID1050x 1050.60.11.D.6
Injector Dynamics ID1300x 1300.60.11.D.6
Injector Dynamics ID1700x 1700.60.11.D.6

AFTERMARKET INJECTORS ON 2JZ-GE ENGINES WITH AIR-ASSIST

Late model (and California-spec) 2JZ-GE engines use Toyota air-assist emissions equipment. These engines use a unique OEM fuel injector that is not replicated in the aftermarket. Air-assist intake manifolds require the Radium injector seats in order to use universal aftermarket fuel injectors, as shown in the picture below. When the provided Radium injector seats are installed into these air-assist intake manifolds, an aftermarket injector that is 60mm long with 11mm upper O-ring and 14mm lower O-ring must be used. The following universal injectors have been verified to be compatible, however there are others on the market that will work that are not listed here.

Injector Dynamics ID1050x 1050.60.11.14
Injector Dynamics ID1300x 1300.60.11.14
Injector Dynamics ID1700x 1700.60.11.14
Injector Dynamics ID2600-XDS 2600.60.11.14