Not sure about a purchase?
Contact us at any of our channels and get inmediate help before making decisions.
Before you buy pistons, first you are going to want to make a firm decision on 2 things.
These two questions will determine things like Compression Ratio, Wrist Pin Wall Thickness, Material that will help narrow your piston selection to a smaller set to decide from.
To learn more about how piston attributes influence piston selection, click here to read the Piston section of Jay's Bottom End Buyers Guide...
Bore Diameter | 79mm (STD) |
Compression Ratio | 10.0:1 |
Rod Length | 5.276in / 134mm |
Stroke | 81.4mm Standard |
Pin | .827in x 2.250in x .180in |
Bore Diameter | 82.5mm (STD) |
Compression Ratio | 9.0:1 |
Rod Length | 5.669in / 144mm |
Stroke | 92.8mm Standard |
Pin | .827in x 2.250in x .180in |
Note | Requires Aftermarket Rods non-tapered 21mm Pin |
Bore Diameter | 82.5mm (STD) |
Compression Ratio | 8.5:1 |
Rod Length | 5.669in / 144mm |
Stroke | 92.8mm Standard |
Pin | .827in x 2.250in x .180in |
Note | Requires Aftermarket Rods non-tapered 21mm Pin |
Bore Diameter | 83mm (+0.020in Over) |
Compression Ratio | 9.1:1 |
Rod Length | 5.669in / 144mm |
Stroke | 92.8mm Standard |
Pin | .827in x 2.250in x .180in |
Note | Requires Aftermarket Rods non-tapered 21mm Pin |
Bore Diameter | 83mm (+0.020in Over) |
Compression Ratio | 8.6:1 |
Rod Length | 5.669in / 144mm |
Stroke | 92.8mm Standard |
Pin | .827in x 2.250in x .180in |
Note | Requires Aftermarket Rods non-tapered 21mm Pin |
Bore Diameter | 82.5mm (STD) |
Compression Ratio | 10.0:1 |
Rod Length | 5.669in / 144mm |
Stroke | 92.8mm Standard |
Pin | .827in x 2.250in x .180in |
Note | Requires Aftermarket Rods non-tapered 21mm Pin |
Bore Diameter | 83mm (+0.020in Over) |
Compression Ratio | 10.1:1 |
Rod Length | 5.669in / 144mm |
Stroke | 92.8mm Standard |
Pin | .827in x 2.250in x .180in |
Note | Requires Aftermarket Rods non-tapered 21mm Pin |
Contact us at any of our channels and get inmediate help before making decisions.