Not sure about a purchase?
Contact us at any of our channels and get inmediate help before making decisions.
Valve Spring Type | Dual |
Seat Pressure | 84lbs @ 40.13mm |
Open Pressure | 250lbs @ 27.94mm |
Coil Bind | 26.16mm |
Max Lift | 13.97mm |
Retainer Material | Titanium |
Valve Spring Type | Dual |
Seat Pressure | 80lbs @ 40.40mm |
Open Pressure | 215lbs @ 12.00mm |
Coil Bind | 22.00mm |
Max Lift | 18.30mm |
Retainer Material | Titanium |
Fuel Pump LPH | 340 LPH @ 40 PSI @ 13.5 Volts |
Fuel Pump Type | In-Tank |
Injector CC | 525cc |
Impedance | High |
Injector Harness | Pigtails |
Injector Inlet Size | 14mm |
Fuel Injector Height | 48mm |
Est. Ethanol Rating | 231 HP |
Est. Gasoline Rating | 357 HP |
Injector CC | 775cc |
Impedance | High |
Injector Harness | Pigtails |
Injector Inlet Size | 14mm |
Fuel Injector Height | 48mm |
Est. Ethanol Rating | 341 HP |
Est. Gasoline Rating | 527 HP |
Injector CC | 1650cc |
Impedance | High |
Injector Harness | Pigtails |
Injector Inlet Size | 14mm |
Fuel Injector Height | 48mm |
Est. Ethanol Rating | 726 HP |
Est. Gasoline Rating | 1122 HP |
Sleeve Type | Dry Flange |
Bore | 3.41 |
Application | K24 & F20C/F22C |
Injector CC | 2600cc |
Impedance | High |
Injector Harness | Plug and Pins |
Injector Inlet Size | 14mm |
Fuel Injector Height | 48mm |
Est. Ethanol Rating | 1144 HP |
Est. Gasoline Rating | 1768 HP |
Stroke | 90.7mm Standard |
Crank Material | 4340 Billet Steel |
Rod Journal | 1.889in / 48mm |
Bore Diameter | 87mm (STD) |
Compression Ratio | 13.4:1 |
Rod Length | 5.893in / 149.7mm |
Stroke | 90.7mm Standard |
Pin | .905in x 1.969in x .197in |
Fuel Fitting Size | 8 AN ORB Male to 6 AN Male Factory M14 Female Inverted Flare to 6 AN Male 8 AN ORB Male Plugs |
Fuel Feed Line Size & Material | 6AN PTFE with 6 AN Hose Ends |
Contact us at any of our channels and get inmediate help before making decisions.