Not sure about a purchase?
Contact us at any of our channels and get inmediate help before making decisions.
Cam Gear Position | Exhaust |
Color | Clear |
Quantity | Individual |
Note | Mivec Delete Cam Gear |
Valve Stem Seal Type | Intake |
Quantity | Set of 8 |
Injector CC | 1065cc |
Impedance | High |
Injector Harness | Plug and Pins |
Injector Inlet Size | 14mm |
Fuel Injector Height | 48mm |
Est. Ethanol Rating | 468.6 HP |
Est. Gasoline Rating | 724.2 HP |
Bore Diameter | 86.5mm (+0.020in Over) |
Compression Ratio | 9.0:1 |
Rod Length | 5.659in / 143.75mm |
Stroke | 86mm Standard |
Pin | .905in x 2.250in x .180in |
Rod Length | 5.659in / 143.75mm |
Rod Material & Type | Forged Steel H-Beam |
Rod Bolt | 3/8 ARP 2000 |
Gram Weight | 620 g |
Head Gasket Bore Diameter | 87.5mm (+0.060in Over) |
Head Gasket Thickness | 0.047in / 1.2mm |
Head Gasket Material | MLS |
Fastener Material | ARP2000 |
Fastener Type | Stud |
Fastener Material | ARP2000 |
Fastener Type | Stud |
Bearing Category | Thrust Washers |
Bearing Type | Non-Race Bearing |
Bearing Size | STD (Standard) |
Valve Stem Seal Type | Exhaust |
Quantity | Set of 8 |
Contact us at any of our channels and get inmediate help before making decisions.