Not sure about a purchase?
Contact us at any of our channels and get inmediate help before making decisions.
| Bore Diameter | 86mm (STD) |
| Compression Ratio | 9.0:1 |
| Rod Length | 5.365in / 136.3mm |
| Stroke | 86mm Standard |
| Pin | .866in x 2.250in x .200in |
| Injector CC | 650cc |
| Impedance | High |
| Injector Harness | Pigtails |
| Injector Inlet Size | 14mm |
| Fuel Injector Height | 60mm |
| Est. Ethanol Rating | 286 HP |
| Est. Gasoline Rating | 442 HP |
| Rod Length | 5.365in / 136.3mm |
| Rod Material & Type | Billet Aluminum I-Beam |
| Rod Bolt | 3/8 ARP L19 |
| Gram Weight | 406 g |
| Color | Zinc Plated |
| Material | Steel |
| Note | Bolts to the bellhousing face and engages the flywheel ring gear for rock-solid crankshaft immobilisation during high-torque jobs like crank bolt removal, clutch fitting, or flywheel installation. Crafted from zinc-plated steel |
| Color | Zinc Plated |
| Material | Steel |
| Note | For RWD SR20DE SR20DET S Chassis with 5/6 Speed Manual Transmission. Kit Includes HRB Engine Stand, Bell Housing Face, and Starter Motor Hole Crank Locking Tools. |
| Material | Aluminium |
| Note | Organizer tray for Intake/Exhaust Valves (up to 38mm head, 7mm stem, and 118mm length), Valve Springs up to 31.5mm outer diameter, Rockers, Lifters, and Shims. |
| Drive | 1/2-Inch Drive |
| Color | Black Oxide |
| Material | 4140 Steel |
| Note | For Rotating crankshaft during engine assembly without a crank damper pulley. |
| Head Gasket Bore Diameter | 88mm (+0.080in Over) |
| Head Gasket Thickness | 0.047in / 1.2mm |
| Head Gasket Material | MLS |
| Fastener Material | ARP2000 |
| Fastener Type | Stud |
| Rod Length | 5.365in / 136.3mm |
| Rod Material & Type | Forged Steel H-Beam |
| Rod Bolt | 3/8 ARP 2000 |
| Gram Weight | 535 g |
| Fastener Material | 8740 Chrome Moly |
| Fastener Type | Bolt |
Contact us at any of our channels and get inmediate help before making decisions.