Not sure about a purchase?
Contact us at any of our channels and get inmediate help before making decisions.
| Bore Diameter | 99.5mm (STD) |
| Compression Ratio | 8.5:1 |
| Rod Length | 5.137in / 130.5mm |
| Stroke | 79mm Standard |
| Pin | .905in x 2.500in x .180in |
| Bore Diameter | 99.75mm (+0.010in Over) |
| Compression Ratio | 9.0:1 |
| Rod Length | 5.137in / 130.5mm |
| Stroke | 79mm Standard |
| Pin | .905in x 2.500in x .180in |
| Valve Spring Type | Single |
| Seat Pressure | 80lbs @ 36.07mm |
| Open Pressure | 178lbs @ 25.40mm |
| Coil Bind | 21.59mm |
| Max Lift | 12.19mm |
| Retainer Material | Steel |
| Injector CC | 1000cc |
| Impedance | High |
| Injector Harness | Pigtails |
| Injector Inlet Size | 11mm |
| Fuel Injector Height | 48mm |
| Est. Ethanol Rating | 440 HP |
| Est. Gasoline Rating | 680 HP |
| Bore Diameter | 99.5mm (STD) |
| Compression Ratio | 8.6:1 |
| Rod Length | 5.216in / 132.5mm Long Rod |
| Stroke | 75mm De-Stroked |
| Pin | .905in x 2.500in x .180in |
| Valve Type | Intake & Exhaust |
| Valve Head Diameter | Intake: 36mm STD Exhaust: 32mm STD |
| Valve Material | Super Alloy, Stainless Steel |
| Valve Series | Competition Plus |
| Injector CC | 1065cc |
| Impedance | High |
| Injector Harness | Plug and Pins |
| Injector Inlet Size | 11mm |
| Fuel Injector Height | 48mm |
| Note | Fits WRX 02-14 & STi 07-18 |
| Est. Ethanol Rating | 468.6 HP |
| Est. Gasoline Rating | 724.2 HP |
| Bearing Category | Connecting Rod Bearings |
| Bearing Type | Race Bearing |
| Bearing Size | HX (Extra Oil Clearance) |
| Bearing Category | Main Bearings |
| Bearing Type | Race Bearing |
| Bearing Size | 0.010in / 0.25mm |
| Rod Length | 5.137in / 130.5mm |
| Rod Material & Type | Forged Steel H-Beam |
| Rod Bolt | ARP 2000 |
| Gram Weight | 575 g |
| Bearing Category | Connecting Rod Bearings |
| Bearing Type | Non-Race Bearing |
| Bearing Size | STD (Standard) |
Contact us at any of our channels and get inmediate help before making decisions.