Not sure about a purchase?
Contact us at any of our channels and get inmediate help before making decisions.
| Head Gasket Bore Diameter | 87mm (+0.040in Over) |
| Head Gasket Thickness | 0.051in / 1.3mm |
| Head Gasket Material | MLS |
| Rod Length | 5.428in / 138mm |
| Rod Material & Type | Forged Steel H-Beam |
| Rod Bolt | 3/8 ARP 2000 |
| Gram Weight | 565 g |
| Injector CC | 1728cc |
| Impedance | High |
| Injector Harness | Plug and Pins |
| Injector Inlet Size | 11mm |
| Fuel Injector Height | 60mm |
| Est. Ethanol Rating | 759 HP |
| Est. Gasoline Rating | 1173 HP |
| Valve Type | Intake |
| Valve Head Diameter | 33.5mm STD |
| Valve Material | Stainless Steel |
| Valve Series | 6000 Series Competition |
| Quantity | Set of 8 |
| Clutch Plates | Single |
| Disc Type | 6 Puck Sprung Ceramic |
| Disc Diameter | 9.375in / 238.13mm |
| Flywheel Included | No |
| Torque Rating | 350 ft/lbs |
| Bearing Category | Thrust Washers |
| Bearing Type | Non-Race Bearing |
| Bearing Size | STD (Standard) |
| Cam Type | Exhaust |
| Cam Duration | ---/264 |
| Cam Lift | .---in/.352in (--.--mm/8.95mm) |
| Valve Type | Intake & Exhaust |
| Valve Head Diameter | Intake: 33.5mm STD Exhaust: 29mm STD |
| Valve Material | Stainless Steel |
| Valve Type | Exhaust |
| Valve Head Diameter | 29mm STD |
| Valve Material | Stainless Steel |
| Valve Series | 6000 Series Competition |
| Quantity | Set of 8 |
| Valve Stem Seal Type | Exhaust |
| Quantity | Set of 8 |
| Bore Diameter | 86.5mm (+0.020in Over) |
| Compression Ratio | 9.0:1 |
| Rod Length | 5.428in / 138mm |
| Stroke | 86mm Standard |
| Pin | .866in x 2.250in x .150in |
| Head Gasket Bore Diameter | 87mm (+0.040in Over) |
| Head Gasket Thickness | 0.040in / 1.0mm |
| Head Gasket Material | MLS |
Contact us at any of our channels and get inmediate help before making decisions.