Not sure about a purchase?
Contact us at any of our channels and get inmediate help before making decisions.
Bore Diameter | 86mm (STD) |
Compression Ratio | 8.9:1 |
Rod Length | 5.428in / 138mm |
Stroke | 86mm Standard |
Pin | .866in x 2.500in x .157in |
Valve Type | Exhaust |
Valve Head Diameter | 30mm +1.0mm |
Valve Finish | Polished |
Valve Material | Stainless Steel |
Valve Guide Type | Exhaust |
Valve Guide Size | Standard |
Valve Guide Material | Manganese Bronze |
Cam Type | Intake & Exhaust |
Cam Duration | 274/274 |
Cam Lift | .437in/.433in (11.10mm/11.00mm) |
Valve Type | Intake & Exhaust |
Valve Head Diameter | Intake: 34.5mm +1mm Exhaust: 30mm +1mm |
Valve Material | Stainless Steel |
Front Spring Rate | 5kg/mm 280lb/in |
Rear Spring Rate | 8kg/mm 448lb/in |
Camber Adjustment | Front Standard |
Coilover Remote Reservoir | No |
Independent Height Adjustment | Yes |
Damping | Single Adjustable |
Bore Diameter | 86mm (STD) |
Compression Ratio | 8.9:1 |
Rod Length | 5.428in / 138mm |
Stroke | 86mm Standard |
Pin | .866in x 2.500in x .197in |
Bearing Category | Connecting Rod Bearings |
Bearing Type | Race Bearing |
Bearing Size | STD (Standard) |
Note | Coated |
Valve Guide Type | Intake |
Valve Guide Size | Standard |
Valve Guide Material | Manganese Bronze |
Injector CC | 1335cc |
Impedance | High |
Injector Harness | Plug and Pins |
Injector Inlet Size | 14mm |
Fuel Injector Height | 60mm |
Est. Ethanol Rating | 587.4 HP |
Est. Gasoline Rating | 907.8 HP |
Stroke | 95mm Stroker |
Crank Material | 4340 Billet Steel |
Rod Journal | 1.889in / 48mm |
Product Weight | 36.6 lbs |
Contact us at any of our channels and get inmediate help before making decisions.