Skunk2 Intake Manifold and Skunk2 70mm Alpha Throttle Body Non-Vtec Acura Integra LS B18A B18B B20

SKU
307-05-0280/309-05-1050
$388.98
1 In Stock

1 of these are currently available in stock at our Sanford, FL location.

Description


Skunk2 Intake Manifold

More than a decade ago, Skunk2’s engineers looked to the popular Integra Type R intake manifold for inspiration and went back to the drawing board. Skunk2’s Pro Series Intake Manifold for Honda's B-series non-VTEC engines features a larger plenum and oversized runners when compared to the ITR manifold for maximum horsepower and torque gains. Instead of producing a manifold with a significantly oversized plenum and excessively short runners that would sacrifice mid-range power, the Pro Series manifold was designed for the “street enthusiast” who wants more power but doesn’t want to sacrifice mid-range performance to get it. The results are improved airflow, an enhanced venturi effect, and both mid-range and top-end power gains.

Skunk2’s cast-aluminum Pro Series Intake Manifolds for Honda’s B-series engines are a direct-fit replacement for all B-series engines thanks to three separate flange designs and are compatible with all factory sensors and throttle bodies as large as 75mm. Pro Series Intake Manifolds offer horsepower and torque gains greater than competitors’ manifolds but without compromising mid-range power output. The design incorporates specially tapered runners as well as a larger, tapered plenum that together preserve mid-range power but increase and accelerate airflow to allow for significant top-end power gains. Pro Series Intake Manifold runner exits are also machined to best match the cylinder head’s ports. Skunk2’s Pro Series Intake Manifold’s shape and design also increases wave scavenging effects at the engine’s ideal operating range, which allow for a broad increase in usable power.

Skunk2 is a familiar name in the intake manifold business, with more than 10 years of experience designing, testing, and building them. Similar to OEM manifolds, Skunk2’s Pro Series Intake Manifolds are shell-molded from 356-aluminum, CNC-machined for superior strength, a precise fit, and a high-quality finish, and vacuum-tested for quality. Each manifold is molded with smooth transitions from the throttle body opening to the plenum to the runners with clean parting lines for an optimal finish, both inside and out and features a genuine Skunk2 nameplate.

1) Is this Pro Series Intake Manifold CARB-legal?
B-Series Pro Series Intake Manifolds have been approved by the California Air Resource Board. A C.A.R.B. certification sticker, which should be placed in the engine bay, is included with each intake manifold.

2)Are all B-series intake manifolds interchangeable?
No, however, Skunk2 offers applications for all B-series engines. Please use the "Search by Vehicle or Engine" drop-down menu above for the appropriate application.

3)How do I know which B-Series Pro Series Intake Manifold I have?
B-Series Pro Series Intake Manifolds can be differentiated from one another by unique punch marks found on their throttle body flanges. One punch mark designates VTEC (non-GS-R) applications , two punch marks designates GS-R applications, and three punch marks designates non-VTEC applications.

4)Will this Pro Series Intake Manifold work well on a forced induction setup?
Yes, Pro Series Intake Manifolds were designed to significantly increase air flow, which is beneficial to naturally aspirated applications as well as forced induction ones.

5)Is tuning required after installing this Pro Series Intake Manifold?
Typically, Pro Series Intake Manifolds produce 6-8whp gains without tuning. Additional power may be extracted with dyno tuning, however, it is not required.

 

Skunk2 70mm Alpha Throttle Body

Skunk2 is proud to introduce its 70mm Alpha Series Throttle Body for Honda's B-series engines (also compatible with D-, F-, and H-series) in its exclusive, fine shot-blasted surface finish. Skunk2’s 70mm Alpha Series Throttle Body is designed to be used with Skunk2’s Pro Series Intake Manifolds as well as OEM and other aftermarket intake manifolds for bolt-on horsepower and torque gains by maximizing engine airflow, all at a competitive price.

Skunk2’s Alpha Series Throttle Bodies are precision die-cast from high-quality materials and include features previously offered only in our Pro Series line, like countersunk, stainless steel mounting bolts, solid brass throttle plates, fully machined bores, and idle adjustment screws for fine tuning. All Skunk2 throttle bodies undergo an extensive design and testing process to produce a throttle body that doesn't just provide more flow but retains smooth drivability and OEM throttle characteristics. 

A larger throttle body is key to producing additional power throughout the powerband on modified engines with increased airflow demands. Skunk2’s Alpha Series Throttle Bodies for B-series engines feature a large, 70mm bore, which results in significant horsepower gains throughout the powerband on heavily modified, naturally aspirated applications and even more on forced induction ones.


Skunk2’s 70mm Alpha Series Throttle Body offers Skunk2 performance, industry-leading customer service, and a limited-lifetime warranty policy, all at a price comparable to lesser budget-minded throttle bodies. Unlike the budget-minded throttle bodies, though, only Skunk2 Alpha Series Throttle Bodies ensure precise fitment and the peace of mind of knowing that a Skunk2 representative is just a phone call or email away.

Specifications

More Information
Availability New In Stock / Available
Note Non-VTEC engines only. IT IS NOT A DIRECT BOLT ON FOR AUTOMATIC CARS. Not compatible with ’90-’93 engines featuring EGR valve; must use reprogrammed or later model ECU.
Shipping Weight (Dimensional) 22.420000
Clearance Sale No
Availability In Stock
Part Type Intake Manifolds, Throttle Bodies
Make Honda / Acura
Model CR-V 97-01 RD1-RD3, Integra LS/RS/GS 90-93 DA/DB, Integra LS/RS/GS 94-01 DC
Engine B18A, B18B, B20B, B20Z
Throttle Body Flange Stock
Brand Skunk2
Carb Legal No
Throttle Body Material Cast Aluminum
Throttle Body Size 70mm
Throttle Body Linkage Cable
Shipping Label Free Shipping

Reviews

Write Your Own Review
You're reviewing:Skunk2 Intake Manifold and Skunk2 70mm Alpha Throttle Body Non-Vtec Acura Integra LS B18A B18B B20

Related Items List (5)

Not sure about a purchase?

Contact us at any of our channels and get inmediate help before making decisions.

Copyright© 2022 realstreetperformance.com | All Rights Reserved