Not sure about a purchase?
Contact us at any of our channels and get inmediate help before making decisions.
Skunk2 Pro Series Adjustable Front Camber Kit 90-93 Integra GS LS RS GS-R B18A B17A
SKU
516-05-5650
$199.99
Available
Not in stock at our Sanford, FL location but electronically verified in stock at the Manufacturer/Distributor within the last 12 hours. (aka: not experiencing a supply delay)
Description
Fitment:
1990 - 1993 Acura Integra (GS, LS, RS)
1992 - 1993 Acura Integra (GS-R)
1992 - 1993 Acura Integra (GS-R)
Note:
Sold in pairs.
Pro Series Front Camber Kits feature the most innovative, durable ball joints available. No other ball joint lasts as long, performs as well, or offers as much clearance for dramatically lowered vehicles.
Pro Series Front Camber Kits feature the most innovative, durable ball joints available. No other ball joint lasts as long, performs as well, or offers as much clearance for dramatically lowered vehicles.
Skunk2 designed its Pro Series Front Camber Kit for the ’90-’93 Integra with specially engineered A-arms and ball joints that allow for maximum positive camber adjustment in a low-profile design. Enthusiasts who are serious about performance can now correct almost all abnormal tire wear due to negative camber and increase high-speed stability.
Each Pro Series Camber Kit includes Skunk2’s all-new, one-piece, forged Pro Series Ball Joints, which feature low-profile top plates for additional clearance between themselves and the shock towers, higher clamping loads for no-slip performance, and a unique design that allows for maximum adjustability. Skunk2 ‘s cadmium-plated, Pro Series Ball Joints can also be adjusted from the bottom up, which allows for quicker and easier adjustments—especially on lowered vehicles with shortened shock bodies. In addition to improved ride characteristics and reduced tire wear on lowered vehicles, Skunk2's proprietary design helps reduce structural fatigue and failure commonly associated with other camber adjustment kits.
Skunk2’s Camber Kits are the number one choice of many professional race teams, including Honda’s own factory road race cars, since 1997. And since 1995, Skunk2 has been leading the industry with its fully adjustable Camber Kits. To accommodate enthusiasts’ needs, Skunk2 made a significant change in 1998 by adding an oversized, rectangular-shaped top mount to its Front Camber Kits for increased positive adjustment. In 2000, Skunk2 pioneered the use of one-piece, forged ball joints. And in 2004, Skunk2 introduced its patent-pending Pro Series Ball Joints—a design that, today, sets the standard for all other camber kits.
1)Are Skunk2 front camber kit ball joints replaceable?
Pro Series Ball Joints can be purchased separately and are compatible with Tuner Series, Pro Series, and Pro Series Plus Camber Kits. Tuner Series Ball Joints are not available separately.
2)How do I adjust my camber with this kit?
Begin by raising the vehicle off of the ground. Access the camber kit’s four adjustment bolts and, with a 4mm Allen wrench, loosen each of them. Note: Pro Series adjustment bolts are accessed from the underside of the control arm; Tuner Series adjustment bolts are accessed from above. Once loosened, pull the hub/knuckle assembly out for positive camber or push it in for negative camber. Once the camber is correctly set, apply low-strength, blue Loctite to each bolt and torque to 144 lb/in.
3)What should I torque my camber kit adjustment bolts to?
Once installed and adjusted accordingly, apply low-strength, blue Loctite to each bolt and torque to 144 lb/in.
4)How much adjustment does this camber kit allow for?
This particular camber kit allows for +/- 3.3 degrees of adjustment.
5)What are the differences between Tuner Series and Pro Series Ball Joints?
Pro Series Ball Joints feature adjustment bolts located underneath their top plates for easier access and include heavy duty top plates that provide superior clamping force. Pro Series Ball Joints are larger, which distributes weight over a larger surface area and results in increased longevity. Pro Series Ball Joints also feature revised casings that allow for increased articulation as well as revised dust boots that feature pre-fabricated crease points for a superior seal.
Specifications
| Availability New | In Stock / Available |
| Barcode | 873265000500 |
| UPC Code | 873265000500 |
| Shipping Weight (Dimensional) | 10.500000 |
| Clearance Sale | No |
| Availability | Available |
| Part Type | Caster & Camber kits |
| Make | Honda / Acura |
| Model | Integra GSR 92-93 DB2, Integra LS/RS/GS 90-93 DA/DB |
| Engine | B17A, B18A |
| Brand | Skunk2 |
| Position Front/Rear | Front |
| Position Left/Right | Left, Right |
| Position Upper/Lower | Upper |
| Carb Legal | Unspecified |
| Shipping Label | Free Shipping |
Reviews
Write Your Own Review
Related Items List (3)
Real Street T-Shirt Black w/ Green & White Logo
SKU#RS-TSHIRT
$23.99
Select Options
Eat Sleep Race ABC Book for Future Race Car Drivers
SKU#ESR 1233
10+ In Stock
Dragy 2.0 GPS Based Performance Meter Box USB-C Bluetooth 5.0 with built-in Battery New Version DRG70-C
SKU#DRG70-C
10+ In Stock
Related Items
-
$159.0010+ In Stock -
$12.9510+ In Stock
-
SPECS
Specs Color Black Size XS, S, M, L, XL, XXL, XXXL, XXXXL Gender Unisex