SuperATV RackBoss 2.0 Rack and Pinion w/ Solid Steel Tie Rods Polaris RZR XP 1000 14-18 XP Turbo 16

RackBoss 2.0 Does What Other Racks Can’t
Every rack eventually wears down, gets sloppy, and makes your steering and responsiveness feel like crap. Or at least every rack did until RackBoss 2.0. We took our original RackBoss and upgraded it to be the strongest, most durable rack on the market. It’s also made with our X24 Tech—a dual-bushing design you can’t get anywhere else. It reduces the wear you’d see on stock by over 50%. With SuperATV’s RackBoss 2.0 Rack and Pinion installed on your Polaris RZR, you can run massive tires and tackle deadly terrain. You can ride the way you want every day for years and quit worrying about your rack.

Minimizes Wear and Tear with Our Dual-Bushing Design
We use a dual PTFE bushing design to prevent the wear and tear that you’re used to. Thanks to our X24 Tech, which uses tough bushings at both ends of the rack, RackBoss 2.0 can power through bigger hits with larger tires without getting sloppy steering. You get like-new operation that lasts longer than any other RZR steering rack. Plus, the built-in grease fittings allow you to push out all the crud that can get in when you go hard in mud or water. It’s only possible with RackBoss 2.0.

Solid Steel Bar Tie Rods
Solid steel bar tie rods give you the robust strength you need to ride through rough terrain. They’re perfect for turning big tires through slop and navigating boulder fields. The 1” diameter steel rod is paired with beefy tie rod ends—3/4” outer tie rods and rebuildable inner tie rods that use 3/4” rod threads and 16 mm rack threads. All that strength lets you get wild.

Patent No. 11,345,393

	RackBoss 2.0 Solid Steel Tie Rod
X24 Tech Dual-Bushing Design	?
Inner Ball and Socket Thread Diameter	3/4” rod threads, 16 mm rack threads
Outer Tie Rod End Thread Diameter	3/4”
Tie Rod Material	Solid steel bar
Greasable	?
Inner Boots	?
Steering Stop Kit	?
Misalignment Bushings, Tie Rod Studs, & Hardware	?

Features

RackBoss 2.0

• Heavy-duty dual PTFE bushings:
• Designed with X24 Tech
• Prevents wear
• Reduces slop
• Improves overall durability
• Tie rod options:
• Solid steel bar
• Solid steel tie rods use:
• 3/4” outer tie rod ends
• Rebuildable inner tie rod ends that use 3/4” rod threads and 16 mm rack threads
• 65% larger housing than stock
• Over 50% less wear than OEM after 15,000 cycles
• Grease fitting for rack gears

 Applications

• Polaris RZR XP 1000 : 2014-2018
• Polaris RZR XP 4 1000 : 2014-2018
• Polaris RZR XP 1000 Hight Lifter Edition 2015+
• Polaris RZR XP 1000 Trail and Rocks Edition 2017+
• Polaris RZR XP Turbo : 2016
• Polaris RZR XP 4 Turbo : 2016