T1 Race Development Honda B-Series Cam Trigger Kit with Intake Cam Gear

Kit with Matching Intake Cam Gear

• The use of this kit
• allows you to change from the factory honda mag sensors in the
• distributor to a more precise digital signal from this sensor. Many
• aftermarket ecus read the Hall signal much better than they do the oem
• signal from the distributor. A lot of times you’ll notice a smoother
• idle & much smoother power at high rpm. This also allows complete
• removal of the factory distributor when a multi channel CDI box &
• individual coils are used with it. If you want to keep a single channel
• ignition box & the distributor, then this setup can still be used.
• These signals are on the input side of the ecu, while the ignition
• system is on the output. Any combination of ignition box/coils will
• work. This kit consists of 1 Golden Eagle cam gear that’s
• been machined & custom fit with rare earth magnets installed in it,
• 1 matching intake cam gear, 1 Dual Pole hall sensor & it’s mating connector, the billet sensor bracket, & installation instructions.