Not sure about a purchase?
Contact us at any of our channels and get inmediate help before making decisions.
TiAL QR BOV 50mm Recirculating Blow Off Valve Blue 10psi Spring 1.5 inch Outlet Aluminum Flange
SKU
QRBOV-Blue-10psi-1.5-AL
$278.95
Back Ordered
This item is out of stock at the manufacturer level, and experiencing a known global supply delay. Contact us for the latest availability date estimation.
Description
Tial designed this blow off valve to work correctly with vehicles that rely on recirculating the blow off valve into the intake system before the turbo to maintain factory-quality drivability.
Many factory turbo setups feed blow off valve discharge air back into the intake after the air flow meter. The factory air flow meter is expecting this air to be there, and sends a signal to the ecu to provide enough fuel from the injectors to provide for it. If you upgrade to a non-recirculating blow off valve that dumps to the atmostphere, the discharge air is no longer feeding back into the intake after the air flow meter. This creates a problem because the ecu, and air flow meter do not know that this air is no longer making it back into the system, but its still assuming it is, so it continues to provide more fuel for the air its not actually getting. This creates a "rich" condition where the air fuel ratio gets unbalanced by having too much fuel and not enough air during "off throttle" conditions like shifting or decelerating. This can cause the car to stall, sputter, and decrease drivabilty in general. Even worse, it can cause spark plugs to become fouled, ruining them .
This kit comes with a 1.5 Inch recirculation fitting, meant for use with a 1.5 inch recirculation hose. This allows this blow off valve to be an easy install for vehicles that came from the factory with a 1.5 inch Mitsubishi recirculation valve. There is also a 1.14 inch adapter made specifically for R35 Nissan GTR applications, and a 1.0 inch adapter for Bosch applications. We have these fittings available as well, however this auction is for the 1.5 inch Mitsubishi style adapter.
Many factory turbo setups feed blow off valve discharge air back into the intake after the air flow meter. The factory air flow meter is expecting this air to be there, and sends a signal to the ecu to provide enough fuel from the injectors to provide for it. If you upgrade to a non-recirculating blow off valve that dumps to the atmostphere, the discharge air is no longer feeding back into the intake after the air flow meter. This creates a problem because the ecu, and air flow meter do not know that this air is no longer making it back into the system, but its still assuming it is, so it continues to provide more fuel for the air its not actually getting. This creates a "rich" condition where the air fuel ratio gets unbalanced by having too much fuel and not enough air during "off throttle" conditions like shifting or decelerating. This can cause the car to stall, sputter, and decrease drivabilty in general. Even worse, it can cause spark plugs to become fouled, ruining them .
This kit comes with a 1.5 Inch recirculation fitting, meant for use with a 1.5 inch recirculation hose. This allows this blow off valve to be an easy install for vehicles that came from the factory with a 1.5 inch Mitsubishi recirculation valve. There is also a 1.14 inch adapter made specifically for R35 Nissan GTR applications, and a 1.0 inch adapter for Bosch applications. We have these fittings available as well, however this auction is for the 1.5 inch Mitsubishi style adapter.
- For use on turbo-charged and super-charged applications (Paxton, Vortec, etc.). The body and all internal components are CNC-machined from 6061 aluminum alloy. It features a large 1.98 in (50.5mm) valve.
- The V-Band design aluminum mounting clamp gives a very clean and unique appearance. The clamp uses Stainless Steel hardware for a long lasting, corrosion-free appearance.
- The valve seal utilizes a Viton O-ring that is clamped in place to prevent the possibility of sticking to the seat and pulling out. The valve stem and guide are Teflon-lubricated, hard anodize-coated for wear resistance.
- The Blow Off Valve also comes with our own machined aluminum banjo-type air fitting and bolt, with over sized 10mm hose barb for quick actuator response. The actuator has a high temp silicone Nomex-reinforced diaphragm for long life.
- An aluminum or mild steel weld base mounting flange is furnished with each unit. Stainless Steel is available at an additional cost. The use of 6061 aluminum allows the housing to be anodized with a selection of colors.
- A single QR BOV can support up to 600hp
- Multiple return port options for easy OE fit
Specifications
| Vendor Name Code Part Number | 002977 |
| Barcode | 002977 |
| Note | Blue Color; 10 PSI Spring; 1.5 Port |
| Shipping Weight (Dimensional) | 4.000000 |
| Clearance Sale | No |
| Availability | Back Ordered |
| Part Type | Blow Off Valves |
| Make | Universal |
| Model | Universal |
| Engine | Universal |
| Color | Blue |
| Brand | Tial Sport |
| BOV Type | Recirculating |
| BOV Spring Pressure | -10 PSI |
| BOV Outlet Size | 1.5"/38mm |
| BOV Weld Flange Material | Aluminum |
| BOV Adjustable | No |
| Carb Legal | Unspecified |
| Shipping Label | Free Shipping |
Reviews
Write Your Own Review
Related Items List (3)
Real Street T-Shirt Black w/ Green & White Logo
SKU#RS-TSHIRT
$23.99
Select Options
Eat Sleep Race ABC Book for Future Race Car Drivers
SKU#ESR 1233
10+ In Stock
Dragy 2.0 GPS Based Performance Meter Box USB-C Bluetooth 5.0 with built-in Battery New Version DRG70-C
SKU#DRG70-C
10+ In Stock
Related Items
-
$159.0010+ In Stock -
$12.9510+ In Stock
-
SPECS
Specs Color Black Size XS, S, M, L, XL, XXL, XXXL, XXXXL Gender Unisex