Not sure about a purchase?
Contact us at any of our channels and get inmediate help before making decisions.
Bore Diameter | 82.5mm (STD) |
Compression Ratio | 9.5:1 |
Rod Length | 5.669in / 144mm |
Stroke | 92.8mm Standard |
Pin | .905in x 2.250in x .180in |
Note | Requires Aftermarket Rods non-tapered 23mm Pin |
Bore Diameter | 83mm (+0.020in Over) |
Compression Ratio | 9.5:1 |
Rod Length | 5.669in / 144mm |
Stroke | 92.8mm Standard |
Pin | .905in x 2.250in x .180in |
Note | Requires Aftermarket Rods non-tapered 23mm Pin |
Retainer Material | Titanium |
Quantity | Set of 8 |
Fastener Material | AMS 6304 |
Fastener Strength | 220ksi Tensile Strength |
Fastener Type | Stud |
Finish | Black Oxide |
Fastener Material | ARP2000 |
Fastener Type | Stud |
Valve Spring Type | Single |
Seat Pressure | 80lbs @ 37mm In 85lbs @ 36.5mm Ex |
Open Pressure | 180lbs @ 27.00mm 185lbs @ 26.50mm |
Coil Bind | 24.6mm |
Max Lift | 11mm In / 10.5mm Ex |
Retainer Material | Titanium |
Quantity | Set of 8 |
Fuel Pump Type | Direct Injection |
Injector CC | 1065cc |
Impedance | High |
Injector Harness | Plug and Play |
Injector Inlet Size | 14mm |
Fuel Injector Height | 34mm |
Est. Ethanol Rating | 468.6 HP |
Est. Gasoline Rating | 724.2 HP |
Valve Spring Type | Single |
Seat Pressure | 80lbs @ 37.00mm |
Open Pressure | 180lbs @ 27.00mm |
Coil Bind | 24.60mm |
Max Lift | 11.00mm |
Quantity | Set of 16 |
Quantity | Set of 16 |
Contact us at any of our channels and get inmediate help before making decisions.