Not sure about a purchase?
Contact us at any of our channels and get inmediate help before making decisions.
Note: It is common to swap a K20 head onto a K24 block however, because they both have a 50.5cc combustion chamber, the compression ratio will not change. So all of the pistons listed below will work the same with either head.
To learn more about how piston attributes influence piston selection, click here to read the Piston section of Jay's Bottom End Buyers Guide...
Bore Diameter | 87mm (STD) |
Compression Ratio | 9.0:1 |
Rod Length | 5.984in / 152mm |
Stroke | 99mm Standard |
Pin | .866in x 2.250in x .180in |
Heads | K20 or K24 |
Bore Diameter | 87.5mm (+0.020in Over) |
Compression Ratio | 10.3:1 |
Rod Length | 5.984in / 152mm |
Stroke | 99mm Standard |
Pin | .866in x 2.002in x .137in |
Heads | K20 or K24 |
Sale note | Sale price is valid for the quantity in stock. |
Bore Diameter | 87.5mm (+0.020in Over) |
Compression Ratio | 11.2:1 |
Rod Length | 5.984in / 152mm |
Stroke | 99mm Standard |
Pin | .866in x 2.002in x .157in |
Heads | K20 or K24 |
Bore Diameter | 87mm (STD) |
Compression Ratio | 10.2:1 |
Rod Length | 5.984in / 152mm |
Stroke | 99mm Standard |
Pin | 9310 Steel .866in x 2.002in x .225in |
Heads | K20 or K24 |
Bore Diameter | 87mm (STD) |
Compression Ratio | 10.0:1 |
Rod Length | 5.984in / 152mm |
Stroke | 99mm Standard |
Pin | .866in x 2.250in x .180in |
Heads | K20 or K24 |
Bore Diameter | 87.5mm (+0.020in Over) |
Compression Ratio | 11.0:1 |
Rod Length | 5.984in / 152mm |
Stroke | 99mm Standard |
Pin | .866in x 2.250in x .180in |
Heads | K20 or K24 |
Bore Diameter | 87.5mm (+0.020in Over) |
Compression Ratio | 10.3:1 |
Rod Length | 5.984in / 152mm |
Stroke | 99mm Standard |
Pin | 9310 Steel .866in x 2.002in x .225in |
Heads | K20 or K24 |
Bore Diameter | 87mm (STD) |
Compression Ratio | 11.5:1 |
Rod Length | 5.984in / 152mm |
Stroke | 99mm Standard |
Pin | .866in x 2.500in x .150in |
Heads | K20 or K24 |
Bore Diameter | 87mm (STD) |
Compression Ratio | 10.2:1 |
Rod Length | 5.984in / 152mm |
Stroke | 99mm Standard |
Pin | .866in x 2.002in x .137in |
Heads | K20 or K24 |
Bore Diameter | 88mm (+0.040in Over) |
Compression Ratio | 13.0:1 |
Rod Length | 5.984in / 152mm |
Stroke | 99mm Standard |
Pin | .866in x 2.002in x .157in |
Heads | K20 or K24 |
Bore Diameter | 87.5mm (+0.020in Over) |
Compression Ratio | 10.0:1 |
Rod Length | 5.984in / 152mm |
Stroke | 99mm Standard |
Pin | .866in x 2.250in x .200in |
Heads | K20 or K24 |
Contact us at any of our channels and get inmediate help before making decisions.