AEM CD-7F Carbon Flat Panel Digital Dash Display Non-Logging w/ PNP Adapter for MSD Atomic TBI EFI

AEM CD-7F Carbon Flat Panel Digital Dash Display Non-Logging/ Non-GPS

AEM Flat Panel Digital Display CD-7 non-logging race dash CAN input only 7-inch diagonal screen carbon fiber enclosure wiring harness included Does Not Include Buttons (See PN 30-3610)

CD-7 Carbon Flat Panel Digital Dash Displays have a compact enclosure that makes them perfect for flush mount installation or in-dash installations with tight tolerances. They include all of the robust features found in the original CD-7 Carbon Dash, but do not have buttons or an LED shade hood built into the enclosure.

CD-7 Carbon Flat Panel Digital Dash Displays feature full-color, daylight readable screens surrounded by a slim, tough, lightweight flow-molded carbon fiber composite housing. Seven ultra-bright LEDs span the top of the display housings for RPM and shift light indication. Users can program them to ascend in specific increments based on RPM range and flash when it is time to shift. Brightness is user programmable on the fixed color LEDs. A remote button kit (PN 30-3610, sold separately) easily wires into the CD Carbon wiring harness and allows users to change pages and clear memory. Two additional programmable LEDs are included in the enclosure and are fully programmable.

AEM CD-5 / CD-7 Plug & Play Adapter Harness for MSD Atomic TBI EFI

AEM’s Plug & Play CAN bus Communication Harness (PN 30-2213) eliminates the need to manually wire a CD-5 Carbon or CD-7 Digital Dash Display to the MSD Atomic TBI EFI system! This harness is fully terminated and connects the CAN2 input on the CD Dash main harness to the CAN output on the MSD Atomic TBI harness. Additional power cables are not necessary as the CAN connection from the MSD Atomic TBI will power the CD-5 Carbon or CD-7 Digital Dash Display via a “Y” connection to the AEMnet port for Power and Ground (see Images tab).

Features

• Provides plug & play connection from MSD Atomic TBI to CD-5 Carbon or CD-7 Digital Dash Display – no additional wiring necessary!
• Connects to CAN2 connector on CD Dash main harness and CAN output on MSD Atomic TBI harness with terminated “Y” connector to power the dash through the AEMnet connector