AI FS1200V2 Fuel Pump Hanger Without Walbro DW400 Pumps for Custom 230mm to 300mm Depth Fuel Tank

FS1200 V2 Fuel Pump Hanger Special Features

Single Fuel Pump Port

• 8AN fuel ports

• Perfect fuel pressure control

• Staged fuel pump operation

• Superior fuel pressure stability due to our design protected 3-to-1 fuel pump manifold

Plug & Play

• The FS1200-V2 features the Aftermarket Industries 6 way (30A) Plug & Play electrical connector to allow independent control of up to three fuel pumps.

Wiring Recommendation: Required For WARRANTY

• Electrical Wire & Circuit Size Formula
  • Circuit Breaker/Fuse Size: 125% (1.25x) total Peak Current (Amps)
    • Circuit Breaker/Fuse must NOT exceed wire current rating
  • Wire Size: 150% (1.5x) total Peak Current (Amps)
  • Relay Size: 225% (2.25x) total Peak Current (Amps)

Bio-Fuel Compatible

• Zero fuel vapour loss

• Zero fuel smell GUARANTEED due to anodising process

• Unleaded, Ethanol, C16

Engineering

• Precision machined from aerospace grade 6061-T6 billet aluminum, designed using best practice engineering principles and stress tested to ensure maximum safety for all motorsport applications

• Perforated billet spacers designed to eliminate return fuel line pressurisation

• 6 way, 30A Plug & Play electrical fuel pump connected integrated into the bulkhead to allow independent fuel pump operation & staging

Compatible Fuel Pumps

• Walbro 255

• Walbro 460 F90000267 F90000274

• Walbro 520 / 525 / 530 F90000285

• Bosch BR540/DW400

• Fuel pumps not included

Height Adjustable

• Suitable for tanks 230mm to 300mm internal depth/height

• Require more height? Add additional sets (package contains 1 set as standard) of our billet perforated spacers which will increase the overall height by 50mm per set (available in BLACK anodise ONLY):

• "Billet Spacer Set" (Sold Separately).

FS1200 Fuel Pump Hanger Power Support Table

*BASE FUEL PRESSURE MUST BE SET TO 45 PSI OR LOWER

(Recommended Fuel Injector: Bosch Motorsport 1650cc)

**Peak Fuel Pressure (Base Pressure + Boost Pressure)

***Peak Voltage

*Rotary Engine: Reduce Power HP Support Figures by 30%

*PUMPS ARE NOT INCLUDED IN THIS PACKAGE

Need to Stage Three Pumps Independently? We've now developed an e85 compatible & submersible 90 degree (30A) triple fuel pump 6 way electrical connector kit(includes 6x 10 AWG (30A) Metri-Pack 280 series pins per connector and is designed SPECIFICALLY for 10 AWG (30A) Tefzel Mil-Spec 22759/34 wire.

Do I Need TO Stage My Fuel Pumps? YES! Fuel pumps MUST be staged in a multi-pump application via a Hobbs Pressure Switch (sold separately).

Specifications:

• 4 PSI Hobbs Switch
• 24" inch harness with 2x female Delphi 280 Series Connectors & 1x male Delphi 280 Series Connector (includes pins)

Need Power? Aftermarket Industries now offers a motorsport-grade Power Distribution Kit for up to 3 pumps (sold separately).

• Single Pump Single Relay Power Distribution Kit Part Number LTL-PDU-SINGLE
• Dual Pump Dual Relay Power Distribution Kit Part Number LTL-PDM-2
• Triple Pump Triple Relay Power Distribution Kit Part Number LTL-PDM-3

Need a Fuel Pressure Regulator? We've made the decision easy and added the most suitable fuel pressure regulator based on the fuel pump selection. We recommend Turbosmart FPR 1200 (1200HP) Fuel Pressure Regulator -6AN part number TS-0401-1104 or FPR 2000 (2000HP) Fuel Pressure Regulator -8 AN part number TS-0401-1106 (sold separately).

Need a Stainless Steel Fuel Filter (Walbro Pumps Only)? Aftermarket Industries developed the first and only 200 micron Walbro fuel pump fuel filter / strainer part number W460-SS (sold separately) designed for motorsport conditions and bio-fuels such as ethanol (e85).

Includes the following items: requires Assembly (estimated assembly time 30 minutes; assembly guide provided)

• Billet FS1200-V2 hanger (8AN ports)

• Billet weld-on flange (includes stainless steel fasteners and o-rings)

• 6 way 90 degree male electrical connector kit (2x female connectors, 12x pins, circlip and o-ring)

• Billet Triple fuel pump bracket (includes stainless steel fasteners and viton rubber insert) - please select either the Walbro or Bosch fuel pump bracket kit

• Two (2) billet swivel fittings

• Baffle plate kit (includes two billet baffle plate adapters, laser cut baffle plate and stainless steel fasteners)