Artec SS Cast V-Band Top Mount Turbo Manifold 240SX S13 S14 S15 SR20DET MVR V-Band Wastegate Flange

The Artec Cast Stainless Steel SR20 manifold has been designed to accept a wide variety of turbos that use a 50 to 55mm ID on the inlet flange, these include Garrett, Precision, and Tial.

This manifold will accept a Garrett from a G25 to G35-1050, Precision from 5858 through to 6870, and Tial standard rotation turbo using a 50-55mm V-band inlet.

The wastegate has been positioned to allow for easy routing for a plumb back or vent to air layout. The wastegate comes fully machined to accept most 44/45/46mm wastegates. The wastegate pipe is also designed to flow up to a 50mm wastegate unit, so you would simply cut our flange off and weld the bigger unit on if required.

We use 33mm ID runner (others normally use a 36/39/42) to help keep throttle response up, as well as transitioning from the SR20 exhaust port shape to our runner over a length of 45mm to aid in flow.

The design allows for very easy oil and water line routing.

The V-band also allows you to run a straight forward facing turbo layout pointed out to the side depending on the owner's taste and turbo selection.

Package Contents:

• Exhaust Turbo Manifold
• Garrett V-Band Locator Ring
• Precision V-Band Locator Ring
• Tial V-Band Locator Ring