EXEDY Hyper Single Series Clutch Flywheel Kit for 1991-1992 Toyota Supra MII MK3 1JZ-GTE Swap

SKU
TH04SD1
$1,361.62
Available

Not in stock at our Sanford, FL location but electronically verified in stock at the Manufacturer/Distributor within the last 12 hours. (aka: not experiencing a supply delay)

Description

Vehicle Fitment:

TOYOTA
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
1991 - 1992 SUPRA ALL ALL ALL ALL ALL ALL w/ 1JZGTE Swap

The Exedy Hyper Single Series clutch is engineered to optimize the performance of cars that are moderately modified, but do not require the clutch capacity of a multi-plate clutch. Similar to our multi-plate clutches, it has a purple anodized, forged aluminum cover. The aluminum cover is stiffer than a stamped cover and therefore allows a higher lever ratio to maintain the pedal efforts at a reasonable level. There is no clamp load deflection as found in a pressed metal type cover. Additionally, the pressure plate features a series of turbine-like, air flow enhancing vanes that keep the clutch cooler under extreme operating conditions to improve wear life.

All Hyper Single clutches come with a chromoly steel flywheel and are normally supplied with a 6-puck cerametallic facing and a spring center damper disc assembly. However, on select vehicles, the new VF (Various Friction) disc may be offered. The chromoly flywheel is lighter than OEM for improved engine response, and a lighter overall assembly. The disc is generally smaller and thinner than the OEM disc making for lower inertia and therefore quicker, easier shifting and less wear and tear on the transmission synchros. The higher clamp load and cerametallic friction facings give approximately twice the holding torque of the OEM clutch and higher than other single disc clutches.

6-Puck Cerametallic Disc
High friction coefficient, low wear, and a special heat resistant material [T5001] has been applied to enable the clutch size to be reduced which in turn lowers mass inertia and improves shift responses for faster gear changes particularly in racing applications. Durability is improved with the use of a stronger, smaller damper disc, designed especially for the Hyper Single clutch.

All Exedy Racing Hyper Single Series Clutch Kits carry SFI 1.1 Certification. Which means, when you buy these products, you can be confident they are certified for use in competitive motorsports.

PLEASE NOTE: All referenced torque ratings are measured at the wheels.

Specifications

More Information
Availability New In Stock / Available
Barcode 651099032801
UPC Code 651099032801
Note For use w/ Hyper Accessory Kit TYAK102
Shipping Weight (Dimensional) 31.990000
Clearance Sale No
Availability Available
Part Type Clutch Kits
Make Toyota / Lexus
Vehicle Model Supra MKIII MK3
Model Supra MK3 86-92 MA70
Engine 1JZ-GTE
Flywheel Material Steel
Brand Exedy
Torque Rating 340 ft/lbs
Clutch Plates Single
Disc Diameter 8.9" / 225mm
Clutch Disc Type Sprung
Clutch Disc Material Ceramic
Clutch Disc Face 6 Puck
Pressure Plate Hyper Series
Clutch Cover Type Pull
Flywheel Included Yes
Carb Legal Unspecified
Shipping Label Free Shipping

Reviews

Write Your Own Review
You're reviewing:EXEDY Hyper Single Series Clutch Flywheel Kit for 1991-1992 Toyota Supra MII MK3 1JZ-GTE Swap

Related Items List (3)

Not sure about a purchase?

Contact us at any of our channels and get inmediate help before making decisions.

Copyright© 2022 realstreetperformance.com | All Rights Reserved