Haltech Platinum PRO Plug-in ECU EMS Honda DC5 and RSX Kit (2005-06) K20Z1 HT055048

Features: 
• Direct plug and play replacement of the OEM ECU, no re-wiring necessary. 
• Uses the cars factory sensors 
• Supports Honda's VTEC and VTC Control 
• Supports Sequential Injection (peak and hold) and Direct fire ignition 
• Windows 2000, XP, Vista, Windows 7 compatible software 
• Real time programming, instant hesitation free adjustment while engine is running 
• Fully user definable 32 x 32 mapping 
• Tuning via Volumetric Efficiency (VE) or Injection time 
• OBD II Code Storing & Malfunction Indicator Light (MIL) Control (Access through laptop only ) 
• Selectable onboard internal MAP sensor rated to 150kPa (up to 1.5 Bar or 22psi boost) 
• Wideband “auto tuning” using user definable target AFR table 
• USB and CAN Communication Port 

Factory Outputs: 
• 4 x Fuel Injector outputs 
• 4 x Ignition outputs 
• Variable CAM Timing (VCT), VTEC, AC Clutch Relay,  Idle Control 
• Thermo Fan,  Check Engine Light,  Fuel Pump 

Factory Inputs:
• Knock Detection Sensor, MAP Sensor, Narrowband Oxygen sensor, 
• Coolant Temperature sensor, Vehicle Speed Sensor 
• Air Temperature sensor, Power Steering Input, Throttle Position Sensor 

Expansion I/O*:
• 2 x Analogue Voltage inputs 
• 2 x Analogue Temperature inputs 
• 4 x Digital pulsed outputs 
*Optional auxiliary harness available to be purchased Haltech Part # HT040003 

Functions: 
• Knock Control 
• Long Term Fuel Trim 
• VTEC on Injection / Ignition 
• VTEC on CAM 
• Closed Loop O2 Control 
• Decel Cut 
• Over Boost 
• Rev Limiter 
• Closed & Open Loop Boost Control 
• Gear Setup 
• Transient Throttle Enhance 
* Generic Correction tables have user definable axis 

Miscellaneous:
• Data Logging: 448Kb of onboard data logging, Storage for approx 40 minutes at 10 logs per seconds, 
6 channels of data 
• Max 20 channels logging capability 
• Tune can be password protected in software 
• Rugged anodized aluminum casing 

Power Requirements: 
Source: 8.6 to 16.5 Volts DC 
Consumption: 530mA @ 12Volts DC 

Physical Dimensions: 
ECU Dimensions Length: 158mm (176mm with MAP nipple) 
Width: 158mm Height: 42mm Weight: 680g (1.5 lb) 

Applications:
Honda DC5 /  Acura RSX 2005 - 2006 Engine Codes: K20Z1  Transmission: Manual Only (Automatic not supported) Not Supported: Honda Wideband O2 Sensor , Immobiliser 

Includes: Platinum PRO Direct Plug-in ECU, Plug and pins for auxiliary I/O harness. Haltech CAN adaptor cable DTM-4 female receptacle/socket to 8 pin black Tyco 3"/75mm (used to adapt a Platinum series ECU to a DTM-4 Elite CAN system), USB programming cable and USB Software Key.

Notes: Requires a CAN I/O 12 Expander Box to accept an input from a flex fuel sensor.