Haltech Platinum Pro Plug- in kit for Evo 9 Mivec 4G63T HT055064

Features: 
• Direct plug and play replacement of the OEM ECU, no re-wiring necessary. 
• Uses the cars factory sensors 
• Supports Sequential Injection (peak and hold) and Direct fire ignition 
• Windows 2000, XP, Vista, Windows 7 & 10 compatible software 
• Real time programming, instant hesitation free adjustment while engine is running 
• Fully user definable 32 x 32 mapping 
• Tuning via Volumetric Efficiency (VE), Injection time or Lambda Correction (MAF 
• Diagnostic Trouble Code Storing & Check Engine Light Control 
(Access through laptop only ) 
• Selectable onboard internal MAP sensor rated to 150kPa (up to 1.5 Bar or 22psi boost) 
• Wideband “auto tuning” using user definable target AFR table 
• USB and CAN Communication Port 

Factory Outputs: 
• 4 x Fuel Injector outputs 
• 2 x Ignition outputs 
• Tacho , MIVEC Control, Boost Control, Intercooler Sprayer,Idle Control, 
• Thermo Fan (variable speed), Fuel Pump (variable speed) 
• A/C Clutch Relay, Check Engine Light 

Factory Inputs: 
• MAF Sensor, Throttle Position Sensor, Knock Detection Sensor 
• Oxygen Sensors, Coolant Temperature Sensor, Vehicle Speed Sensor 
• Air Temperature Sensor, MAP Sensor (JDM and USA Only), 
• Power Steering Switch 

Expansion I/O*: 
• 2 x Analogue Voltage inputs 
• 2 x Analogue Temperature inputs 
• 4 x Digital pulsed outputs 
*Optional auxiliary harness required to be purchased Haltech Part # HT040003 

Functions: 
• Knock Control 
• Long Term Fuel Trim 
• ACF On - Base Tables 
• Closed Loop O2 Control 
• Decel Cut 
• Over Boost 
• Closed & Open Loop Boost Control 
• Gear Setup 
• Transient Throttle Enhance 

Correction Tables:  Fuel  Ignition  Boost: 
• Cranking 
• Air Temp Target Correction 
• Coolant Temperature Correction 
• Map Correction 
• Zero Throttle Gear Correction 
• Cylinder Trim 
• TPS Correction 
• Generic Correction 1* 
• Generic Correction 2* 
• Gear Correction 
• Post Start 
• Air Temp Duty Correction 
• Post Start
* Generic Correction tables have user definable axis 

Miscellaneous: 
• Data Logging: 448Kb of onboard data logging, Storage for approx 40 minutes at 10 logs per seconds, 6 channels of data 
• Max 20 channels logging capability 
• Tune can be password protected in software 
• Rugged anodized aluminum casing 

Power Requirements: 
Source: 8.6 to 16.5 Volts DC 
Consumption: 530mA @ 12Volts DC 

Physical Dimensions: 
ECU Dimensions Length: 154mm (174mm with MAP nipple) 
Width: 158mm Height: 42mm Weight: 680g (1.5 lb) 

Applications:
Mitsubishi Evolution 9 (JDM, USA, AUS & RHD Euro models only) 
Mitsubishi Evolution 8 MR (JDM, AUS & RHD Euro models only) * 
*Not suitable for USA Spec Evolution 8 MR 

Engine Codes: 
4G63 

Transmission: 
Manual Only (Automatic not supported) 

Not Supported Functions: Immobiliser 

The Platinum Pro Plug-in Mitsubishi EVO 9 Kit includes: 
Platinum PRO Direct Plug-in ECU, Plug and pins for auxiliary I/O harness. Haltech CAN adaptor cable DTM-4 female receptacle/socket to 8 pin black Tyco 3"/75mm (used to adapt a Platinum series ECU to a DTM-4 Elite CAN system), USB programming cable and USB Software Key.

Notes: Requires a CAN I/O 12 Expander Box to accept an input from a flex fuel sensor.