ISC V2 Basic Coilover Kit Street Sport 320i 328i 428i 330i 430i 335i 435i 340i 440i F30 F32 12-17

The ISC V2 Basic coilover has all the great features of the ISC V2 N1, but has rubber isolated top mounts instead of a camber plate/pillowball application in the front. Many street enthusiasts may not need to have adjustable camber plates, so the ISC V2 Basic was made in order to simplify the product and eliminate any feature that may not be used for your average street car that is not going for track performance or aggressive camber/stance. This also allows us to offer the ISC V2 Basic coilover at a lower price point to our customers without sacrificing quality.

Spring Perch Isolator Pads: Revised hardened spring perch isolator pads reduce friction, allowing for more efficient preload adjustment and a longer product lifespan. Copper based anti-seize lubricant now included for coilover setup/installation

Mono-tube damper with high pressure nitrogen. Larger cylinder and piston design to advance driving stability and dexterity.

Threaded portion of shaft is powder coated then salt spray coated for optimum street durability (we suggest also using anti seize or other protective products when you install your coilovers for even further protection from the elements if you are exposed to snow and salt).

Valving Option:
ISC Suspension offers three valving options to choose from, street comfort, street sport, and track race.

Street Sport Valving
This coilover kit features Street Sport valving which is designed to be above OEM, and is more aggressive and ideal for street, drift, and occasional autocross. If you’re looking to bring your car to its limits on the street, this one is for you!

ISC also offers custom valving, please contact for an accurate ETA.

ISO9001:2000R Certified

ARTC Certified

Rebound/Compression adjusted in unison via 32-way adjustment knob

T6061 anodized aluminum top plate with isolated rubber bushing for better road compliance

High rigidity steel piston rods. Meets with race/sport standards. Shafts are valved according to the spring rate. A shock dyno is used to ensure quality and consistent results.

Made from high quality SAE9254 steel. Dyno tested over 500,000 times on compression inspection with less than 5% deformation.

Fully customizable spring rates (spring rates vary depending on application, custom spring rates are available).

Ride Height Adjustable

Full length height adjustability of up to 3 inches on most applications. High quality T6061 aluminum alloy used for all adjustment locks to provide a lightweight design that holds spring and vehicle down force.

Preload is separate from ride height; the lower you go, the ride quality stays the same.

All ISC Basic Coilovers are backed by our industry leading limited lifetime warranty!