K1-Street Coilover Kit Honda Civic 01-05 EM2 ES1 EP3 RSX Base Type S 02-06 DC5

Application: 

• 01-05 Civic ES1
• 01-05 Civic EM2
• 01-05 Civic EP3
• 02-06 RSX DC5

Spring Rate: 
F-8K / R-9K
 
Note:
* 25% stiffer damper
 

K-Tuned K1 Street Coilovers are designed to give you the best ride quality without sacrificing any comfort or reliability. Our goal was to design a suspension setup that is reliable for daily driving while providing an enjoyable sporty ride. All setups feature adjustable ride height and NEW 12-way dampening to adapt the ride to your preference. We spent a lot of time sourcing the best components and brought them all together with the help of a reputable engineering company that was up for the task.

 Starting with the strut, we invested a lot of time to ensure that they are both durable and reliable. We start with a durable heat-treated steel piston and needle valve to ensure proper travel and linear compression ratio. The strut body is designed to handle the heat and the life cycle it will be put through. Each strut is filled with proprietary oil that is designed to maintain its viscosity even under increased heat or abuse. The oil will keep its unique properties over the years to maintain that same ride quality. This is crucial to the quality and longevity of the strut. Poor quality suspension setups use cheaper oil that can become frothy, lose its strength and degrade overtime. These inferior suspension systems will lose their fluid movement and/or become too soft. We finish the strut piston with longstanding, high-heat rated double seals that are designed to take abuse without breaking a sweat, literally. No leaking struts here. The strut is the most important part of any suspension system. It determines the ride quality and the overall feel. We do not just use a stiffer spring at the suspension to compensate for a poor quality strut; instead we made sure to start from scratch and build a complete coilover that will differentiate itself from the rest.

 Next we pair the struts with a high-tensile strength steel spring that is designed to last without sagging or premature wear. Springs are tested to ensure there is no coil bind and full range of motion. The high quality strut and dampening allows us to use the proper spring rates needed for each setup that will complement the adjustable dampening rates. Each spring is mounted on adjustable aluminum perches that can be used to adjust preload and travel. Incorporated washer and spacers are in place to keep the system free moving especially on McPherson style struts.

The coilover system is finished with a combination of powder coating, electroplating, and anodizing to give it a great look and protect it. McPherson style struts feature adjustable upper camber plates and pillow ball mounts.