Magnus 9.7 GPM MF Mechanical Fuel Pump Kit Honda B Series B16A B17A B18C1 B18C5

Magnus 9.7 GPM MF Mechanical fuel pump kit solution for your Honda B series engine!

Magnus B Series Distributor Drive with Magnus 9.7 GPM MF mechanical Fuel Pump. Since many B series racers and streetcars have moved to coil on plug setups and crank and cam trigger from the front engine side, this is a perfect location to mount a fuel pump. While using our Magnus MF fuel pump it even simplifies installation by keeping the fuel lines on one side.

Features:

• Mechanical fuel pump is driven from the distributor drive of the Honda B series (for cars with no distributor)
• Can be used with multiple fuels (Gas, Methanol, and Ethanol)
• Encapsulated high speed high precision ball bearing holding a hardened steel hex drive shaft
• Simplifies your fuel system
• Increases reliability -No more need for multiple electric pumps
• Increases safety – in case of fire or engine failure engine , pumps shuts off cutting the fuel supply to fire
• Decreased heating of fuel
• 9.7 GPM at 40psi
• 8.5 GPM at 60psi
• Reliability -No more need for multiple electric pumps
• Safety – in case of fire or engine failure engine , pumps shuts off cutting the fuel supply to fire
• Fuel pump can rotate clockwise or counter clockwise

Counterclockwise rotation, when looking at the front of the pump (shaft side facing you) : Left side is inlet right side is outlet

IMPORTANT: Torque clamp bolt to: 29 FT/LBS

Magnus MF Mechanical fuel pump Hex Drive 3/8" same side inlet and outlet

Magnus Motorsports announces the release of their Multiple Fuel (MF) Mechanical Fuel Pump compatible with gas, methanol, and ethanol.

Magnus Motorsports has designed their MF Fuel Pump with the inlet and exit of fuel lines on the same side of the pump, thereby eliminating the need for any additional types of fittings such as elbows and u-bends. This is especially beneficial in the tight confines of transverse motor configurations. The MF Fuel Pump is configured with an industry standard 3/8 male hex shaft. The compact design of the fuel pump results in ease of mounting positions.

The MF Fuel Pump is constructed of out of billet aluminum. Internal hardened gears are hand lapped increase lifespan and reduce the coefficient of friction. The gear housing is constructed from Anti-Galling and corrosion resistant material and further DLC coated to resist the low lubricant properties of alcohol based fuels.

Its small size and weight can supply huge amounts of fuel. The Magnus MF Mechanical fuel pump supports up to:

9.7 GPM @ 40 psi relative pressure @ 80% IDC with at 5000 RPM of pump speed (1/2 engine speed) 2800HP on Methanol 4300HP on Ethanol 5700HP on Gas

8.5 GPM @ 60 psi relative pressure @ 80% IDC with at 5000 RPM of pump speed (1/2 engine speed) 2500HP on Methanol 3700HP on Ethanol 5000HP on Gas

Allow 20 percent more headroom for your fuel system