Meziere Chevy GM LS1 LS6 Street Bolt On High Flow Electric Water Pump 55 GPM w/ Idler Black WP319S

ELECTRIC PUMP LSX HIGH FLOW, STREET PUMP, 55 GPM WITH IDLER

Innovative design makes for an easy installation. Unbolt your factory pump and bolt on an easy 11-14 horsepower with our street style water pump. An idler is incorporated onto the pump so your belt routing remains in its stock configuration. American made with quality far superior to any other performance aftermarket company, we build our water pumps with pride right here in the USA. Our 300 series pumps move more water and produce more pressure than any other electric pump on the market. That means better protection for your high horsepower, high demand engine! Our 2 year, unlimited mileage guarantee and full satisfaction money back guarantee should convince you that buying Meziere is buying value!

This water pump model features:

• Fits GM LS engines LS1 through LS6 - Not all LS applications. See WP329, WP330 and WP332.
• Idler design lets you keep all of your serpentine belt driven accessories
• Suitable for street or drag strip use – 3000+ hour life expectancy
• Show quality finish
• High flow design provides 55 gallons per minute free flow rating
• All stainless steel hardware included
• Ports provided for heater and bypass
• Heater and bypass fitting included
• 185 degree thermostat included.
• Stainless steel large diameter main shaft with high performance ceramic seal
• Accepts the factory style thermostat housing
• Outlet fitting included - 1.25" hose for stock configuration

• Finishing The System: This pump is supplied complete with gaskets and hardware and fittings. You should not need any additional items for this installation.
• This pump model does accept heater and bypass connection as a standard.
• In this application the thermostat is removed from the lower hose (inlet) and moved to the upper hose (outlet). The pump is shipped with a 185 degree thermostat installed. Be sure to remove the factory thermostat.
• Amperage draw: Under normal use the pump will draw 11-12 amps.
• Overall Height Dimension: The standard pump is 7.8" long from the mounting surface to the tip of the pump.
• Pump Weight: This application weighs 14.9 lbs.
• 16 volt systems: The 12 volt pump will work for limited use applications. Do not run the pump while charging the 16v system.
• NOTE: This pump is not compatible with truck accessory package.

Additional Notes: The standard 35 GPM pump is suitable for normally aspirated engines up to 650HP. Supercharged, turbocharged and high compression, high horsepower applications should use the 55GPM High Flow pump only.