Progress Tech 94-01 Integra 96-00 Civic / Si Coilover Series II Kit FR 450lb RR 450lb

1992 - 2000 Honda Civic
1996 - 2000 Honda Civic Si
1993 - 1997 Honda Del Sol
1994 - 2001 Acura Integra

These new systems have been redesigned with improved shock dampening rates, modern foam-type bump stops, and less part content for a simple and durable sport suspension system. This is a perfect system for street performance, new track day and autocross enthusiasts, as well as project cars with engine swaps.

We now are listing NINE SPRING RATE COMBINATIONS for our Competition Series II (CS2) coil-over systems for these popular Honda/Acura platforms. Here is some help SELECTING YOUR SPRING RATE combination, all are noted by (front/rear):

B&K-SERIES/Twin cam applications

450/450
Good compromise, less understeer, less roll & more grip.


MORE DETAILS about these combinations:

** STREET-SPORT
SQUARE setups (350/350, 450/450 etc.)
These setups are a compromise between ride quality and all-out handling. Some impact on ride quality makes for less understeer and faster vehicle response. The stiffer front springs also help prevent bottoming out. This combination is plenty stiff, and NOT recommended for true daily drivers (TDD) on poor roads, or drivers rolling a lot of commuter miles. Good for 'fun cars' driven by more experienced drivers.

ALWAYS CONSIDER the following:
* Primary vehicle use
* Secondary vehicle use
* Weather and road conditions
* Driver skill & experience

CONSIDER...
For the sake of comparison, typical OEM spring rates for these applications are approximately 220#/in front, and 110#/in rear. With the numerous Civic & Integra applications, there is a range of spring rates, and these CS-II systems are significant upgrades from your OEM damper and spring calibrations.


PHOTOS SHOWN:
-Complete system with trimmed bump stops installed on the dampers. You will trim them for your application.

-NEW cellular foam-type bump stop kit. This is a superior OEM-like material and design. These can be trimmed to suit your application.

-INSTALLATION shown on an EF chassis. Note the new brake line bracket now included.

• Front drop: 1"" to 3"" --- Rear drop: 1"" to 3""
• One year limited warranty

• Kit does NOT include the black OEM top hats. This kit is designed to reuse the OEM top hats. 
• Actual product may be different than pictured