Not sure about a purchase?
Contact us at any of our channels and get inmediate help before making decisions.
Not in stock at our Sanford, FL location but electronically verified in stock at the Manufacturer/Distributor within the last 12 hours. (aka: not experiencing a supply delay)
VEHICLE MODELS:
Ford Mustang 2015 Base
Ford Mustang 2019 Bullitt
Ford Mustang EcoBoost 2015-2021
Ford Mustang EcoBoost Premium 2015-2021
Ford Mustang GT 2015-2021 (except GT350)
Ford Mustang 2015 GT 50 Years Anniversary Edition (except GT350)
Ford Mustang GT Premium 2015-2021 (except GT350)
Ford Mustang V6 2016-2017
Note:Brake Kits are designed to fit OE Factory Spindles. Contact us if you are not using a factory spindle.
Dynapro Radial Rear Drag Brake Kit
DynaPro4R Drag Race rear brake kits deliver high torque stopping power with a substantial weight savings over the OE brake components. Dynamic mount steel rotors weigh only 5.7 pounds each. They attach to the OE hubs with lightweight forged aluminum hats using our T-nut mounting system that allows the rotor to move independently of the hat during heat cycles. This eliminates stress at the mount points and the subsequent rotor distortion that can otherwise occur with fixed mount steel plate rotors. Dynamic mount rotors also assure full release from the pads to run true and drag free down the track. Parking brakes are also eliminated for additional weight savings. Clamping force is provided by radial mount DynaPro 4R four piston aluminum calipers weighing in at only 4.1 pounds each. DP4R calipers feature stainless steel pistons, internal bore seals, stainless steel bridge wear plates, and allow easy access to the pads for service without removing the calipers from the mount. BP-20 compound SmartPads provide high response and holding power when cold, and resistance to fade when hot. The complete package mounts to the OE upright and hub with full bolt-on installation. This kit is configured for drag racing only and is not recommended for street use. A minimum size 17” wheels are required along with a stainless steel braided flexline kit available separately.
Kit Summary | |
---|---|
Rear End Axle: | OEM |
Axle Offset: | 0.00 |
Mount Type: | Radial |
Caliper Type: | 4 - Type III Ano |
Rotor Diameter: | 12.90 |
Min Wheel Diameter Req'd*: | 17 |
*This Brake Kit may fit 17-inch wheels. Please refer to the wheel clearance diagram to check to see if it will fit your specific wheel.
Availability New | In Stock / Available |
Shipping Weight (Dimensional) | 32.000000 |
Clearance Sale | No |
Availability | Available |
Part Type | Brake Kits |
Make | Ford |
Model | Mustang Ecoboost 15-17 S550 |
Engine | 2.3L Ecoboost |
Brand | Wilwood |
Rotor Disc Material | Steel / Black Coating |
Disc Diameter | 12.90 |
Rotor Disc Diameter | 12.90" / 327.66mm |
Disc Width | 0.38" / 9.65mm |
Rotor Disc Construction | 2-Piece |
Rotor Disc Type | Drilled |
Caliper Piston | 4 Piston |
Caliper Color | Ano |
Caliper Body | Narrow Dynapro Radial Mount |
Disc Vane Design | Solid |
Position | Rear |
Position Front/Rear | Rear |
Position Left/Right | Left, Right |
Carb Legal | Unspecified |
Shipping Label | Free Shipping |
Color | Black |
Size | XS, S, M, L, XL, XXL, XXXL, XXXXL |
Gender | Unisex |
Contact us at any of our channels and get inmediate help before making decisions.