Wilwood Forged Dynalite ST 4 Piston Ano Front Big Brake Kit 11.00 2 pc Slotted GT Rotor 95-05 Miata

BRAKE KIT: Forged Dynalite Big Brake Front Brake Kit (Hat)
Spindle Type: Factory Disc Spindle

VEHICLE MODELS:

Mazda MX-5 Miata 1991-2000 All
Mazda MX-5 Miata 1990 All , from serial 152766
Mazda MX-5 Miata 1990 All , thru serial 152765
Mazda MX-5 Miata 2001-2005 All except Sports Suspension
Mazda MX-5 Miata 2002-2005 w/ Sports Suspension
Mazda MX-5 Miata 2001 w/ Sports Suspension from VIN 206467
Mazda MX-5 Miata 2001 w/ Sports Suspension to VIN 206466

Note: 1. Brake Kits are designed to fit OE Factory Spindles. Contact Wilwood if you are not using a factory spindle.

Forged Dynalite Big Brake Front Brake Kit (Hat)

This kit is configured for dedicated road racing on the 1990-2005 model year Mazda MX-5 Miatas. It requires 15” wheels designed with additional inside clearance to accommodate the larger than stock brake package. The four piston FDL/ST calipers used in this kit feature a forged aluminum body with a Type III Mil-Spec hard anodized, medium gray color finish. Hard anodizing provides superior wear resistance in the piston bores, and high resistance to abrasion and corrosion throughout. Thermlock® pistons are used to reduce heat transfer from the pads to increase fade resistance, and to extend service life by decreasing temperatures in the caliper body, fluid, and seals. Internal damper springs and controlled retraction, high-temperature piston seals assure consistent pedal height from start to finish. Caliper piston volumes are sized for compatibility with OE power brake boosters and master cylinders, and are easily configured with manual brake conversions and balance bar pedals using appropriately sized master cylinders. Spec37 alloy, GT competition series 11.00” diameter 72 vane rotors are mounted to either the OE hubs, or Wilwood racing ProHubs, with weight saving forged aluminum hats. Unsprung and rotating weight are minimized while providing high cooling efficiency and rugged durability with thermal stability in sustained high heat competition. Mounting brackets, including all premium grade fasteners, secure the calipers in the stock location, without modifications. This race winning system is completed with high temperature, high friction, endurance compound race pads selected specifically by application. Stainless steel braided flexlines are included in each kit to complete the installation.

Kit Summary
Spindle Type:	Factory Disc Spindle
Mount Type:	Lug
Caliper Type:	4 - Type III Ano
Rotor Diameter:	11.00
Min Wheel Diameter Req'd*:	15

*This Brake Kit may fit 15-inch wheels. Please refer to the wheel clearance diagram image to check to see if it will fit your specific wheel.