Not sure about a purchase?
Contact us at any of our channels and get inmediate help before making decisions.
This item is out of stock at the manufacturer level, and experiencing a known global supply delay. Contact us for the latest availability date estimation.
Real Street RS1600 Stroker Kit 2JZ-GTE 90mm Billet Crank R&R Aluminum Long Rods 87mm 9.62:1 CP Real Street Spec RS1600 Pistons with 300M DLC Wrist Pins
Included in RS1600 3.2L Stroker Kit:
CP 3.2L Real Street Spec 2JZ Stroker RS1600 Pistons 87mm 9.62:1
CP Turbo Rings Set , 1.2mm Top Ring, 1.2mm 2nd Ring, 2.0mm Oil Ring, 87mm bore, PVD
PVD Turbo ring sets feature a thicker 1.2mm steel top ring for increased durability and resistance to
flutter. The face of the ring is PVD coated - a technology that is harder and much smoother than traditional gas nitride, providing increased endurance, and less friction against the cylinder wall. The 2.0mm
oil ring is light, but supplies adequate tension for oil control. Since the oil ring is smaller than most other
oil rings, it allows for more material to be used on your piston ring lands and increases piston strength.
These rings come standard with our Sport Compact HD shelf pistons, and can be supplied with any custom CP piston.
CP Pistons 300M Ultra Duty DLC Coated Wrist Pins Set
Specs:
300M Material
.866" (22mm) Diameter
2.500" (63.5mm) Length
.250" (6.35mm) Wall Thickness
DLC Coated
Real Street 90mm Billet Stroker Crankshaft 2JZ-GTE Supra MKIV Honda 1.888 Journal by Brian Crower
BC crankshafts are made from the finest aerospace grade 4340 steel billet material. CNC machined on state of the art, 5 axis Mazak Integrex 300-IV CNC machines to exacting tolerances (.0001"). Every crankshaft features large radius journals that add rigidity for high horsepower, high boost, high rpm applications. Gun drilled, CNC ground oil holes feature a smooth surface for extra oiling, tear dropped for added oil scoop, cross drilled for priority main feeding to the rods and micro polished to a mirror finish for optimum bearing lubricity. All cranks are stress relieved, shot peened, magna flux inspected and nitrided (multi step heat treatment) for ultimate performance. Fully profiled counterweights are designed for reduced windage through the crankcase creating less oil resistance for better rpm potential.
R&R Aluminum 5.669 Long Connecting Rods L19 Bolts Honda Journal Lexus Toyota Supra 2JZ-GTE 2JZGTE
Aluminum Connecting Rods offer the benefit of absorbing vibration and load that may cause a steel rod to bend or break. While they are sometimes lighter than steel rods, the real benefit comes from the increase in abuse they can handle over a steel rod.
The downside to an aluminum rod is that the steel rod will live longer, however the aluminum rod will usually live as long as the aluminum piston is attached to, so if the engine has to come apart to replace pistons, you will replace rods at the same time when using an aluminum rod.
These rods use a smaller rod journal that is specifically designed to be used with a crank that uses a smaller journal as well. The smaller journal means you can use a smaller bearing, which means less bearing speed. Slowing the bearing speed down gives the engine a better chance at living longer. So make sure when buying these rods, that you will be using a crank that has honda journals instead of standard toyota journals.
Rod bearings are not included in this listing, but these are the approved doweled rod bearing part numbers that can be used with this rod:
Clevite CB-1665HXND
Clevite CB-1665HND
Clevite CB-1665HNDK
Clevite CB1665HNDC
Note | Honda Rod Journal Crankshaft. DLC Pins |
Shipping Weight (Dimensional) | 76.410000 |
Clearance Sale | No |
Availability | Back Ordered |
Part Type | Stroker Kits |
Make | Toyota / Lexus |
Model | Supra TT MK4 93-98 JZA80, Supra NT MK4 93-98 JZA80, SC300/Soarer 92-00 Z30, IS300 01-05 XE10, GS300/Aristo 91-97 S140, GS300/Aristo 98-05 S160 |
Engine | 2JZ-GE, 2JZ-GE VVTi, 2JZ-GTE, 2JZ-GTE VVTi |
Rod Length | 5.669" / 144mm |
Rod Length Oversize | 0.079" / 2.0mm |
Bore Diameter | 87mm |
Bore Oversize | 0.040" / 1.0mm |
Stroke | 90mm (3.2L Stroker) |
Compression Ratio | 9.6:1 |
Compression Ratio Range | 9.0:1 - 10.0:1 |
Pin Size | 0.866" / 22mm |
Included Ring Set | CPT-3425PVD |
Included Pin | I866-2500-25CPMC |
Head cc | 45 cc |
Gasket Thickness | 0.051" / 1.3mm |
Dome cc | -9.29 cc |
Crank Material | 4340 Billet Steel |
Compression Height | 1.176" / 29.87mm |
Piston Coating | Skirt Coating |
Brand | Real Street |
Small End Width | 1.010 |
Skirt Type | Full Round |
Rod Material | Billet Aluminum |
Rod Bolt | 3/8" ARP L19 |
Piston Material | 2618 |
Beam Type | Solid Beam |
Carb Legal | No |
Wrist Pin Wall Thickness | 0.250" |
Wrist Pin Dimensions | .866" x 2.500" x .250" |
Pin Material | 300M DLC |
Shipping Label | Free Shipping |
Contact us at any of our channels and get inmediate help before making decisions.